A COMPLETE COURSE IN DRESSMAKING
In cutting, allow seams at all points except the center-back.
To Make the Sleeve Pattern: Use your block sleeve pattern. Lay it on another piece of paper and mark around the outside of it for a working diagram. (See Fig. 40.) Decide how wide you want the cuff. Measure up this amount from the lower edge of the sleeve and mark a line as line AB, Fig. 40.
_-_Fig_41.png)
Divide this line in half and mark point C. Also mark a point half way between C and B, as point D on the diagram and another point half way between point C and A, as point E on the diagram.
To set nicely, the sleeve ought to be longer in the back and shorter in the front. Measure a half inch above point E and mark point G. Also measure a half inch below point D and
[ 34 ]
