metal could be fixed, a similar piece of metal being adjusted above the float, so that by working the plunger or the pressure bulb the two metals could be brought into contact with graduated pressure. The other arrangements adopted were the contact of spirals compressed by micrometer screw, and filings similarly compressed between two electrodes.
With the arrangement described above the action of radiation on metallic contacts was studied, a brief account of which will be given under their respective groupings. It may here be mentioned that certain metals which do not usually show any contact-sensitiveness can be made to exhibit it by very careful manipulation. The nature of the response of a coherer is to a certain extent modified by its condition and particular adjustment. A coherer freshly made is more difficult to adjust, but at the same time far more sensitive. The action is more easily under control and more consistent after a few days' rest, but the sensitiveness is not so abnormally great. The contacts of clean surfaces are difficult to adjust, but such contacts are more sensitive than those made by surfaces which are tarnished. Pressure and E. M. F., as previously stated, also modify the reaction. For example, a freshly made and very delicately adjusted coherer subjected to slight pressure and small E. M. F. showed an increase of resistance by the action of radiation. The galvanometer spot after a short interval, resumed its former position, exhibiting a recovery from the effect of radiation. The coherer continued to exhibit this effect for some time, then it relapsed into the more stable condition in which a diminution of resistance is produced by the action of radia-
