pressed. This mould was formed of a mixture of plaster-of-Paris with other materials, so as to become hard in the course of a few hours.
The first difficulty arose from the impression of one tabular number on the mould being distorted by the succeeding one.
I was not then aware that a very slight depth of impression from the type would be quite sufficient. I surmounted the difficulty by previously passing a roller, having longitudinal wedge-shaped projections, over the plastic material. This formed a series of small depressions in the matrix between each line. Thus the expansion arising from the impression of one line partially filled up the small depression or ditch which occurred between each successive line.
The various minute difficulties of this kind were successively overcome; but subsequent experience has proved that the depth necessary for stereotype moulds is very small, and that even thick paper, prepared in a peculiar manner, is quite sufficient for the purpose.
Another series of experiments were, however, made for the purpose of punching the computed numbers upon copper plate. A special machine was contrived and constructed, which might be called a co-ordinate machine, because it moved the copper plate and steel punches in the direction of three rectangular co-ordinates. This machine was afterwards found very useful for many other purposes. It was, in fact, a general shaping machine, upon which many parts of the Difference Engine were formed.
Several specimens of surface and copper-plate printing, as well as of the copper plates, produced by these means, were exhibited at the Exhibition of 1862.
I have proposed and drawn various machines for the purpose of calculating a series of numbers forming Tables
