116 STAT. 3208 PROCLAMATION 7529-MAR. 5, 2002 ANNEX (continued) 19 (C) diffusion annealed nickcl-graphiie plated products, which arc cold-rolled or lin mill black plaic base meial conforming to the chemical requirements based on AISI 1006; haMng the bottom side of the base metal first electrolytically plated with natural nickel, and the top side of the strip then plated with a nickel-graphite composition; with the strip then annealed to create a diffusion of the nickel-graphite and the iron substrate on the bottom side; with the nickel-graphite and nickel plated material sufficiently ductile and adherent to the substrate to permit forming without cracking, flaking, peeling, or any other evidence of separation; having coating thickness: top side; nickel-graphite layer = 1.0 micrometers; bottom side: nickel layer = 1.0 micrometers; (D) nickel-phosphorous plated diffusion annealed nickel plated carbon product, ha\ ing a natural composition mixture of nickel and phosphorus electrolytically plated to the top side of a diffusion annealed nickel plated steel strip with a cold rolled or lin mill black plate base metal conforming to the chemical requirements based on AISI 1006; with both sides of the base metal initially electrolytically plated with natural nickel, and the material then annealed to create a diffusion of the nickel and iron substrate; another layer of the natural nickel-phosphorous then electrolytically plated on the top side of the nickel plated steel strip; with the nickel-phosphorous, nickel plated material sufficiently ductile and adherent to the substrate to permit forming without cracking, flaking, peeling, or any other evidence of separation; having a coating thickness: top side: nickel-phosphorous, nickel layer = 1.0 micrometers; nickel-phosphorous layer = 0.1 micrometers; bottom side: nickel layer = 1.0 micrometers; or (E) diffusion annealed, tin-nickcl plated products, electrolytically plated with natural nickle to the top side of a diffusion annealed tin-nickel plated cold rolled or tin mill black plate base metal conforming to the chemical requirements based on AISI 1006; with both sides of the cold rolled strip initially electrolytically plated with natural nickel, with the top side of the nickel plated strip electrolytically plated with tin and then annealed to create a diffusion between the nickel and tin layers in which a nickel-tin alloy is created, and an additional layer of natural nickel then electrolytically plated on the top side of the strip of the nickel-tin alloy; sufficiently ductile and adherent to the substrate to permit forming without cracking, flaking, peeling or any other evidence of separation; having coating thickness: top side: nickel-tin-nickel combination layer = 1.0 micron meters; tin layer only = 0.05 micrometers; bottom side: nickel layer = 1.0 micrometers; the foregoing designated as X-109; (.x.x.xvi) flat-rolled products (provided for in subheading 7210.49.00), designated as X-061 or X-065, other than of high-strength steel, known as "ASE Iron Flash" and either- (A) having a base layer of zinc-based zinc-iron alloy applied by hot-dipping and a surface layer of iron-zinc alloy applied by electrolytic process, the weight of the coating and plating not over 40 percent by weight of zinc; or (B) two- layer-coated corrosion-resistant steel with coating composed of (I) a base coating layer of zinc-based zinc-iron alloy by hot-dip galvanizing process, and (2) a surface coating layer of iron-zinc alloy by electro-galvanizing process, having an effective amount of zinc up to 40 percent by weight, the foregoing designated as X-065; (xxxvii) products designated as X-075, known as alloy aluminizcd steel sheet, in coils, 0.58 mm minimum by 1214.44 mm by coil, ASTM A463, type I, DZ, TI-25 coating, latest addition extra smooth, non-chromated, tension leveled, temper rolled, reduction to be 1.25 percent or more tension leveled; flatness to be 3.1S mm maximum deviation in 0.76 m electrostatic oiling; 75 MG each side maximum, no "sag" or "header" lines, no surface defects, 508 - 609.6 mm coil ID; 9071.85 kg maximum coil weights, must enamel without " blisters" or visible surface defects (provided for in subheading 7225.99.00); (xxxviii) corrosion resistant products designated as X-104, as described below: (A) flat-rolled products (provided for in subheading 7212.60.00), clad on each surface with aluminum which measures less than 10 percent of the total thickness of the material;
�
