Page:United States Statutes at Large Volume 116 Part 4.djvu/783

This page needs to be proofread.

PROCLAMATION 7529—MAR. 5, 2002 116 STAT. 3211 ANNEX (continued) 22 mm by 738.5 mm scroll cut dimensions; or (3) 0.300 mm thickness and 776.3 mm by 866.8 mm scroll cut dimension, all the foregoing designated as X-039, X-061 or X-07S; (vlit) im mill products for battery containers, tin and nickel plated on a cold rolled or tin mill black plate base nKtat conforming to chemical requirements based on AISI KMki: havinj: both sides of the cold rolled substrate elcctrolytically plated with natural nickel; then annealed to create a diffusion of the nickel and iron substrate; then an additional layer of natural tin electrolytically plated on the top side; and again annealed to create a diffusion of the tin and nickel alloys; with the tin-nickel, nickel plated material sufficiently ductile and adherent to the substrate to permit forming without cracking, flaking, peeling, or any other evidence of separation; having a coating thickness: top side: nickel-tin layer together measuring 1 micrometer; tin layer alone measuring 0.05 micrometer; bottom side: nickel layer measuring 1.0 micrometer; the foregoing designated as X-109; (xliii) steel products coated with a metallic chromium layer between 100 - 200 mg/m- and a chromium oxide layer between 5-30 mg/m-. with a chemical composition, by weight, of 0.05 percent rru.ximumcarbon. O.O.^ percent maximumsilicon,0.60 percent maximum manganese,002 percent maximum phosphorus, and 0.02 percent maximum sulfur: if a product known as "42RSN" having a magnetic flux density ("Br") of 10 KG minimum and a coercive force ("He") of 3.8 Oe maximum, the foregoing designated X-142; (xliv) tin mill products designated as X-160 or X-128, as described below: (A) products provided for in subheading 7326.90.85, with the following characteristics: ASTM A 657/623, T3 (temper). Base Weight 80, tin free steel, PC023 DRCAN Protact External Coat: Pet 20G, St/intemal Coat; Pet 20C, ST, RP, MR (Steel type), CA (continuous anneal), Light Stone Finish; or (B) products provided for in subheading 7326.90.85, with the following specifications: laminated • 15 microns PET colorless l/S & 0/S. or laminated -15 microns PET colorless l/S and 25 microns PET white 0/S: ECCS (tin coating), CA (temper), SC (surface flnish). T5 (temper), MR, ordered width of 855.7 mm; or, ECCS, CA, 5C, T5, MR (ordered width of 846.1 nun; or, ECCS, CA, 5C, T5, MR (ordered widths of 896.9 mm and 900.1 mm); (xlv) hot-rolled bar (provided for in subheading 7228.30.80), containing by weight 0.80 percent or more but not more than 0.90 percent of carbon, 0.10 percent or more but not more than 0.45 percent of silicon, 12 percent or more but not more than 14 percent of manganese, not more than 0.035 percent of phosphorus, not more than 0.040 percent sulfur, not more than 0.5 percent of chromium, not more than 0.15 percent of molybdenum, and not more than 0.40 percent of nickel and designated as X-032; (xlvi) products designated as X.045. as described belowr (A) hot rolled profiles known as T-bulb flanges," of trapezoidal cross-section; with rounded edges of 5 mm radius, with dimensions of the parallel sides of 90 mm to 250 mm, inclusive, and of 20 mmto 30 mm, inclusive; with a thickness of 25 mm or more but not more than45 mm; cenified and die stamped with the mark of a national shipbuilding classification society; (B) specialized welded steel products known as "shipbuilding T-bulb profiles," engineered with life-cycle attributes to impede corrosion and yield superior strength to weight with reduced surface area while extending the lowest K-factor (fatigue) rating of any current symmetrical shipbuilding profile: with standard web heights of 350 to 1,000 mm and in web thicknesses of 11to16nun;or (C) specialized steel products knovm as "shipbuilding L-profiles," engineered with life-cycle attributes to impede corrosion while yielding superior strength to weight with reduced surfacearea:insizesof200x90x9x12mmto400x120x11.5x23mm;