PUBLIC LAW 109–163—JAN. 6, 2006
119 STAT. 3175
block shall prepare a plan, appropriate for the level of technological maturity of the block, to test, evaluate, and characterize the operational capability of the block. (2) CONSULTATION AND REVIEW.—The preparation of each plan under this subsection shall be— (A) carried out in coordination with the Missile Defense Agency; and (B) subject to the review and approval of the Director of Operational Test and Evaluation. (b) REPORTS ON TEST AND EVALUATION OF BLOCKS.—At the conclusion of the test and evaluation of block 06 and each subsequent block of the Ballistic Missile Defense System, the Director of Operational Test and Evaluation shall submit to the Secretary of Defense and the congressional defense committees a report providing— (1) the assessment of the Director as to whether or not the test and evaluation was adequate to evaluate the operational capability of the block; and (2) the characterization of the Director as to the operational effectiveness, suitability, and survivability of the block, as appropriate for the level of technological maturity of the block tested.
Subtitle D—High-Performance Defense Manufacturing Technology Research and Development SEC. 241. PILOT PROGRAM FOR IDENTIFICATION AND TRANSITION OF ADVANCED MANUFACTURING PROCESSES AND TECHNOLOGIES.
10 USC 2521 note.
(a) PILOT PROGRAM REQUIRED.—The Under Secretary of Defense for Acquisition, Technology, and Logistics shall conduct a pilot program under the authority of section 2521 of title 10, United States Code, to identify and transition advanced manufacturing processes and technologies the utilization of which would achieve significant productivity and efficiency gains in the defense manufacturing base. (b) CONSIDERATION OF DEFENSE PRIORITIES.—In carrying out subsection (a), the Under Secretary shall take into consideration the defense priorities established in the most current Joint Warfighting Science and Technology plan, as required under section 270 of the National Defense Authorization Act for Fiscal Year 1997 (Public Law 104–201; 10 U.S.C. 2501 note). (c) IDENTIFICATION FOR TRANSITION.—In identifying manufacturing processes and technologies for transition to the defense manufacturing base under the pilot program, the Under Secretary shall select the most promising transformational technologies and manufacturing processes, in consultation with the Director of Defense Research and Engineering, the Joint Defense Manufacturing Technology Panel, and other such entities as may be appropriate, including the Director of the Small Business Innovation Research Program.
VerDate 14-DEC-2004
07:21 Oct 30, 2006
Jkt 039194
PO 00003
Frm 00643
Fmt 6580
Sfmt 6581
E:\PUBLAW\PUBL003.119
APPS06
PsN: PUBL003
�
