Translation:On the spacetime lines of a Minkowski world/Paragraph 7

Translation:On the spacetime lines of a Minkowski world
by Friedrich Kottler, translated from German by Wikisource
§ 7. Differential geometry of the curves in . Comoving tetrad. Frenet formulas. Two classes of curves
2291643Translation:On the spacetime lines of a Minkowski world — § 7. Differential geometry of the curves in . Comoving tetrad. Frenet formulas. Two classes of curvesFriedrich Kottler

We are now going to investigate the nature of these curves of constant curvatures more closely, for which we require results from the differential geometry of curves of three-fold curvature in , which should be developed in advance.[1] As it is in the nature of things, many applications to the theory of the world lines in can then be made.

The comoving tetrad. edit

Let there be a curve in parameter representation

 

then the directions of

 

determine a line through   (the tangent) and a neighboring point of the curve,

 

determine a plane through   (osculating plane) and two neighboring points of the curve,

 

determine a   through   (osculating space) and three neighboring points of the curve.

Now, the direction cosines for the following four lines through   are determined:

    direction cosines of the tangent;
    direction cosines of the principal normal, i.e. that normal which is perpendicular to the tangent in the osculating plane;
    direction cosines of the binormal; it is perpendicular to the osculating plane in the osculating space;
    direction cosines of the trinormal; is the normal of the osculating space.

These four directions form an orthogonal tetrad [Vierkant]; the determinant is

 

with the other ten orthogonality conditions

 

One forms the symmetric matrix:

 

and denotes its principal subdeterminants as follows:

 

If   denotes the subdeterminants of   order of  , it follows

 

The three radii of curvature . edit

Two consecutive tangents form the angle  ; when   is the arc defined by  , it follows:

 

in which  .

For the angle   of two consecutive osculating planes it is furthermore

 

Eventually it follows for the angle   of two consecutive osculating spaces:

 

For curves located entirely in   or  , it is

 

or

 

or

  (straight line)

If   are all constant along the curve, it can be displaced into itself, as when can read off from the “natural equations” of the curve.

The formulas of Frenet and Serret provide the change of the direction cosines of the axes of the comoving tetrad with  :

  (19)

Kinematic interpretation of the Frenet formulas. edit

Let us introduce a curve   being congruent to  . The corresponding point-pairs   and   shall be marked by the same  . Then it follows

 

If one writes

 

then it follows from the Frenet formulas:

  (20)

This means though, that the radius vector   is constant with respect to magnitude and direction, it is an infinitesimal orthogonal transformation of the axis cross. The passage from the comoving tetrad of point   to that of point   thus happens, neglecting the translation along the tangent around  , by an infinitesimal orthogonal transformation, namely

a rotation in the osculating planes   around   from   to  ;

a rotation in the plane   around   from   to  ;

a rotation in the plane   around   from   to  ;

as it can be easily seen from the previously written form (20) – because   is indeed the component with respect to   of the radius vector   –, if one additionally uses the law of the addition of infinitesimal rotation. This could also have been derived from the definition of the angles    .

Radius vectors fixed in normal-space . edit

These are evidently the ones, which are located in the normal space and which do not participate in the rotations  ; if we, for a moment  , set the change in location of the normal-space or its normal equal to zero, then such vectors must remain parallel to themselves, thus they must be given by the previous formulas (20) for  :

  (21)

If we put

 

then a vector fixed in normal-space is given by  , while generally a vector rigidly connected with the tangent can be split into a vector   fixed in normal-space and a constant component along the tangent  .

For a vector fixed in normal-space we have  

  (22)

which is the form of the Frenet equations in  , leading to two identical Riccati equations for

  and  .[2]

Because we have by (22)

 

thus, which is also clear in terms of geometry:

 

For the general integral system of (22) it follows by employment of the initial values   for  :

  (23)

Due to the constancy of   it follows that the matrix

 

is orthogonal. Introducing   in the expression for

  (24)

if follows

  (25)

by which we introduce the vectors

  (26)

These are of course special cases of vectors fixed in normal-space, which emerge from (25) by  ,   or  ,  . They will serve us to form a framework which is rigidly connected with the tangent (of course, they are all perpendicular to the tangent, as they are perpendicular among themselves), i.e. if the tangent is not changing its direction, they remain parallel with themselves in all directions. As a reference system in the sense of relativity theory, comoving with the moving point in the most general case, we have to call a system varying from location to location in such a manner, that the direction cosines of its spacelike axes are given as functions of   (the arc of the world line of the moving point) by   or   or   with  , while those of its timelike axes are given by   (direction cosine of the tangent). Because an arbitrary point   will steadily be at rest in the “comoving system”  , as long as this point only satisfies the condition that its world line can be related to world line   by equal values of   in such a way, that   becomes a vector fixed in normal-space, so that within

 

the   satisfy the differential equations (22). In order to prove this – note that   acts as a timelike parameter (even though not as arc  !) also on the world line of   – we consider the differential quotient

 

It follows by (19) and (22)

  (27)

i.e. the tangent of the wordline of   is steadily directed parallel to the tangent in the related point of world line  ; the former therefore is called a parallel curve of the latter, and it is the orthogonal trajectory of all   normal-spaces of the latter.[3] We can also introduce the vectors   instead of  , and then we have

1736

 

with

 

by (26)

  (28)

In this representation one recognizes the principal type of Born's rigid body.[4]

Vectors rigidly connected with the tangent. edit

For those, we of course have

 

and  , while the   satisfy the differential equations (22). Thus by (19) and (22)

  28a

Characterization of the world lines. edit

1. Using the real parameter  :

 

(tangent is timelike); furthermore

 

therefore the angle   is purely imaginary,   and   are real; regarding the radii of the three curvatures:   is real,   and   are imaginary.

2. Using the imaginary arc   gives:

 

3. From   it follows

 

and therefore

 

From   it follows

 

But from the four subdeterminants of this matrix   we can compute the trinormal, which is spacelike and never minimal. Therefore, for   these four subdeterminants must vanish individually, and therefore also   or  .

4. Infinities or discontinuities in the arising quantities are excluded.

Curves, whose three curvatures are constant. edit

We have the linear system (19) in four dependent variables   with constant coefficients:

 

which provides us four linear independent systems of integrals. However, when   or   are two such systems, it follows from the things previously stated:

1738

 

there are quadratic relations, which we can be arranged by suitable choice of the integration constants, so that we obtain an orthogonal matrix of 16 direction cosines. From the four quantities   it then follows

 

In respect to that, we have to consider the characteristic determinant:

 

There are the following cases in the denotation of the elementary divisors:

(A)  , where there arise two opposite equal roots;

(B) multiple roots:

1.   one root-pair is zero: It follows

  and 

while   can be   or  
2.   both root-pairs are zero:

 

3. [(31)] both-root pairs are zero:

 

Other cases are not possible; thus with respect to the world lines it is impossible:

  with   or   with  .

Furthermore, the double root

 

is impossible; because it leads to

  or  ,

thus

 

However, by the things previously said,   is real,   and   are purely imaginary; therefore it should be   (case 3) or   (case 2).

Integration of the system; case (A). edit

Let us set:

 

 

 

 

Furthermore, the four pair-wise orthogonal unit vectors   shall be defined for the value   as follows:

 

Then the integral reads:

 

where

  and  

Here, the   are the location parameter of a plane  , and the dual system   gives the plane   which is completely perpendicular to it. In these planes   or  , around the point

 

there is a rotation around the angles   or   on the circle with radius   or  . The curve   lies therefore on a hypersphere, which is its osculating hypersphere at point  , which is at the same time the osculating hypersphere for all points of the curve, as one can see after some computations using the formula by Brunel l.c. for the center of the osculating hypersphere

 .

The meaning of the mentioned rotations   and   is as follows: Every orthogonal infinitesimal transformation in   is (similar as in  ) given by a skew-symmetric  -row matrix or also by the related vector of second kind, which in the general case is not represented by a surface-piece, but by two mutually perpendicular surface-pieces,[5] i.e. its components   do not define a straight line in the infinitely distant   of  , but a linear complex,[6] because of

 

It is known, that in the general case this complex shares two conjugated polars with every surface of second kind; for the absolute measure-surface, they become the infinitely distant lines of two mutually perpendicular planes. In the case of the infinitesimal orthogonal transformations underlying the Frenet formulas, it is just

 

thus

 

becomes a complex in case A, and the mentioned two perpendicular planes representing it,   or  .

This is at first true for every curve of three-fold curvature. If now  ,  ,  , then the elements of the rotations remain the same from point to point, then the individual infinitesimal orthogonal transformations are added together to a finite orthogonal transformation having the same rotation planes; we write

 

 

and we obtain for curve A (simultaneously the trajectory of the most general orthogonal transformation of determinant +1 and fixed origin)

 

The related family. edit

The other trajectories of the family are indeed curves (A) as well. They are only distinguished by one another by the mutual relation of their points. Thus it will be

 

  or   shall belong to the value  ; we write

 

and in this way we obtain   at   or also

 

 

where   is the angle, which corresponds to the value  , thus  , by which we find (if we also set  ,  ):

 

with   as the parameter of the family,   ,  , are constant for one and the same family.

Representation of the family as the totality of curves, which “participate” in the “windings” of the principal curve. edit

Every point, which is fixed in the comoving tetrad, thus

 

where the   are constants, will evidently participate in its rotation, i.e. it describes a trajectory of the family, which is definitely determined by curve  . Thus the previous curves   must also be representable in this shape, of which one can easily convince oneself when one computes the axes   of the comoving tetrad for

 

One will find, that the quantities

 

within

  etc.

can be computed as linear functions of the  , where only those quantities arise as coefficients, which depend on  , i.e. constants. The directions

  and  

therefore allow for the representation

 ,

in which the   are constants with respect to   or  . This system varying with the light-point or reference-point, is therefore evidently nothing other than the comoving tetrad of the light-point or of the reference-point, because the direction for the latter can again be computed in the form

 

Generalization. edit

Let there be a curve of three-fold curvature of   and a position  , where we have the values

 .

If we determine (by using these values) a curve (A) that goes through  :

 

where

 

and  ,   are composed of the values   in accordance with the things previously said, then this curve has a contact of second order with the given one in  . It will become a contact of third order, if

 

Thus a curve will go through the point  , which participates in the windings of curve  , if again

 

where the   are constants. The emergence of this curve can be imagined by drawing the trajectory of family (A), which in   is determined by the local values  , through the respective location  , and by displacing   always by an infinitesimal piece along the thus determined trajectories (which are varying from place to place); but such infinitesimal piece has only a contact of first order with the eventual curve

 ,

and a contact of second order for

 .

===Case (B) 1. Common helix, or circular line of  .===

If   and at first  , then one has to set

 

where   forms an orthogonal triad, and one obtains

 

which is a helix having its axis parallel to   through the center of the circular cylinder  , with slope parameter  . If one takes

 

 

then one obtains:

 

which at the same time is an orthogonal transformation at which a rotation in the   plane arises, while the plane   experiences a displacement along  , from which it follows for the family:

 

which again can be represented by

 

when   are constant; this representation can be extended to curves that are participating in the windings of an arbitrary given one for which  . To that end, the given curve only needs to osculate through the curve B, where the latter is of second order (for   of the third order) and is computed in terms of  ,   (these shall be the values in   at the given curve). Then one finds curve   by compilation of the infinitesimal trajectory pieces, which leave behind the orthogonal transformations belonging to the respective  .

In case B, the directions

 

are again representable in the form

 

with constant  .

The special case   does not require a particular discussion (circle).

Case (B) 3. Lyon curve (Helix on a cylinder of minimal lines). edit

Let us introduce within the integral (B) 1:

 

and then we let   converge against zero. Then one obtains the case

 ;

it follows

 

(  is the arc,   thre radius of the first curvature,  ). In this case, the direction   coincides with one of the two minimal lines of plane  . The curve therefore lies on a cylinder, whose generators are directed parallel to this direction. The tangent

 

forms a constant product   with the minimal vector in this direction

 ,

which is a known property of all helices; therefore it has to be denoted as helix.[7]

If

 

and

 

are taken, it follows 1748

 ,

which is simultaneously the trajectory of the respective orthogonal transformation. For   we shall have  , thus if we now replace   by  :

 

One can additionally assume

 

and obtains the representation of the family:

 .

The remarks made earlier are valid again, concerning the form

 

and the representation of   as

 

Reality questions. edit

Regarding A it follows, that when for instance   only contains spacelike directions, then   as the completely perpendicular plane must also contain timelike directions (its infinitely distant line cuts the absolute measure-surface in a real way). In our representation,   must be an imaginary angle. Regarding B (1) it follows, that the rotation angle   can be real or imaginary and correspondingly the displacement can be imaginary or real: cases (B) 1 and 2 of § 6. The types of curves of constant curvatures are thus obtained the same way as there.



  1. Following Brunel, Math. Annalen, Vol. 19, and Landsberg, Crelle's Journal, Vol. 114.
  2. Scheffers, Anwendung der Differential- und Integralrechnung auf Geometrie‚ I (1901), p. 212.
  3. Scheffers, l. c., p. 304 f.
  4. Herglotz, Ann. d. Phys., 31 (1910), p. 401, Case A.
  5. Sommerfeld, l.c. (32), p. 753 f.
  6. Herglotz, l.c., p. 405 f.
  7. Scheffers, l.c., p. 286 f.