EXTERIOR PAINTING.
Old Work. In repainting an old surface, it is especially important that the contractor consult a practical painter. Carefully examine the surface to be painted before commencing the work and determine whether there is any loose paint or whether the undercoat is in condition to break loose as soon as an elastic coat is applied over it. If the building has previously been primed with ochre, watch out for spots that have received a heavy coat and are ready to break loose. Examine the surface for dampness from basements, drain pipes, down spouts and wet soil. Before starting to paint, see that dampness has not undermined the paint and that the boards do not contain enough moisture to cause the paint to break loose as soon as other coats are applied over them. Look out for loose scales, fine or powdered. They do not appear to be dangerous, nevertheless, they will keep the paint from adhering solidly to the surface and make it soon break away. Be careful about mildew, as this condition is always a sure sign of dampness, and paint applied over mildew will soon spot or peel. Examine the surface to see whether the paint of previous coatings has shriveled. Paint applied over a shriveled undercoating will soon break loose. Prepare the paint according to the surface over which it is to be applied.
Repainting. When the surface to be repainted is in good condition and not cracked or peeled, thoroughly clean the building free from dust, dirt or soot. Wash mildewed spots with turpentine. It is seldom that one mix of paint will answer for all parts of the building. Portions of the house that are the most exposed and weather-beaten should receive the most elastic coat of paint. Portions that are
142
