This page has been proofread, but needs to be validated.

120

ground, one near the top and one set on the top, the latter of which formed what we call the wall-plates. Two large rafters whose upper ends crossed each other, were laid from the wall plates to the heads of the taller uprights. The ridge-pole rested in the fork formed by the upper ends of the rafters crossing each other. Horizontal poles were then laid along each slope of the roof, one pair being fastened close up to the exterior angle of the fork. The rafters were slender poles or bamboos passed over the ridge-pole and fastened down on each end to the wall-plates. Next followed the process of putting on the thatch. In order to keep this in its place two trees were laid along the top resting in the forks, and across these two trees were placed short logs at equal distances, which being fastened to the poles in the exterior angle of the forks by ropes passed through the thatch, bound the ridge of the roof firmly together.

The walls and doors were constructed of rough matting. It is evident that some tool must have been used to cut the trees to the required length, and for this purpose a sharpened stone was probably employed. Such stone implements have been found imbedded in the earth in various parts of Japan in company with stone arrow-heads and clubs. Specimens of the ancient style of building may even yet be seen in remote parts of the country, not perhaps so much in the habitations of the peasantry, as in sheds erected to serve a temporary purpose.

The architecture of the Shintô temples is derived from the primeval hut, with move or less modification in proportion to the influence of Buddhism in each particular case. Those of the purest style retain the thatched roof, others are covered with the thick shingling called Hiwada-buki, while others have tiled and even coppered roofs. The projecting ends of the rafters (called Chigi) have been somewhat lengthened, and carved more or less elaborately. At the new temple at Kudanzaka in Yedo they are shown in the proper position, projecting from the inside of the shingling, but in the majority of cases they merely consist of two pieces of