# A Treatise on Electricity and Magnetism/Part IV/Chapter XIV

# CHAPTER XIV.

## CIRCULAR CURRENTS.

*Magnetic Potential due to a Circular Current.*

694.] The magnetic potential at a given point, due to a circuit carrying a unit current, is numerically equal to the solid angle subtended by the circuit at that point; see Arts. 409, 485.

When the circuit is circular, the solid angle is that of a cone of the second degree, which, when the given point is on the axis of the circle, becomes a right cone. When the point is not on the axis, the cone is an elliptic cone, and its solid angle is numerically equal to the area of the spherical ellipse which it traces on a sphere whose radius is unity.

This area can be expressed in finite terms by means of elliptic integrals of the third kind. We shall find it more convenient to expand it in the form of an infinite series of spherical harmonics, for the facility with which mathematical operations may be performed on the general term of such a series more than counterbalances the trouble of calculating a number of terms sufficient to ensure practical accuracy.

For the sake of generality we shall assume the origin at any point on the axis of the circle, that is to say, on the line through the centre perpendicular to the plane of the circle.

Let (Fig. 46) be the centre of the circle, the point on the axis which we assume as origin, a point on the circle.

Describe a sphere with as centre, and as radius. The circle will lie on this sphere, and will form a small circle of the sphere of angular radius .

Let

, |

, |

. |

Let be the pole of the sphere, and any point on the axis, and let .

Let be any point in space, and let , and .

Let be the point when cuts the sphere.

The magnetic potential due to the circular current is equal to that due to a magnetic shell of strength unity bounded by the current. As the form of the surface of the shell is indifferent, provided it is bounded by the circle, we may suppose it to coincide with the surface of the sphere.

We have shewn in Art. 670 that if is the potential due to a stratum of matter of surface-density unity, spread over the surface of the sphere within the small circle, the potential due to a magnetic shell of strength unity and bounded by the same circle is.

We have in the first place, therefore, to find .

Let the given point be on the axis of the circle at , then the part of the potential at due to an element of the spherical surface at is.

| , | ||

or | , |

Writing

,

, | (1) | ||||

or | | . | (1′) |

By the characteristic equation of ,

.

Hence

.

(2)

This expression fails when , but since ,

.

(3)

As the function occurs in every part of this investigation we shall denote it by the abbreviated symbol . The values of corresponding to several values of are given in Art. 698.

We are now able to write down the value of for any point , whether on the axis or not, by substituting for , and multiplying each term by the zonal harmonic of of the same order. For must be capable of expansion in a series of zonal harmonics of with proper coefficients. When each of the zonal harmonics becomes equal to unity, and the point lies on the axis. Hence the coefficients are the terms of the expansion of for a point on the axis. We thus obtain the two series

, | (4) | |||||

or | . | (4′) |

.

(5)

We thus obtain the two series

, | (6) | ||||

or | . | (6′) |

.

(7)

If we assume , the centre of the circle, as the origin of coordinates, we must put , and the series become

, | (8) | ||||

| |||||

, | (8′) |

where the orders of all the harmonics are odd^{[1]}.

*On the Potential Energy of two Circular Currents.*

Fig. 47.
696.] Let us begin by supposing the two magnetic shells which are equivalent to the currents to be portions of two concentric spheres, their radii being and , of which is the greater (Fig. 47). Let us also suppose that the axes of the two shells coincide, and that the angle subtended by the radius of the first shell, and the angle subtended by the radius of the second shell at the centre .

,

,

Fig. 48.
697.] Let us next suppose that the axis of one of the shells is turned about as a centre, so that it now makes an angle with the axis of the other shell (Fig. 48). We have only to introduce the zonal harmonics of into this expression for , and we find for the more general value of ,

. |

This is the value of the potential energy due to the mutual action of two circular currents of unit strength, placed so that the normals through the centres of the circles meet in a point in an angle , the distances of the circumferences of the circles from the point being and , of which is the greater.

If any displacement alters the value of , then the force acting in the direction of the displacement is .

For instance, if the axis of one of the shells is free to turn about the point , so as to cause to vary, then the moment of the force tending to increase is , where.

,

. |

698.] As the values of occur frequently in these calculations the following table of values of the first six degrees may be useful. In this table stands for , and for .

, , , , , .

699.] It is sometimes convenient to express the series for in terms of linear quantities as follows:—

Let be the radius of the smaller circuit, the distance of its plane from the origin, and .

Let , , and be the corresponding quantities for the larger circuit.

The series for may then be written,.

700.] In calculating the effect of a coil of rectangular section we have to integrate the expressions already found with respect to , the radius of the coil, and , the distance of its plane from the origin, and to extend the integration over the breadth and depth of the coil.

In some cases direct integration is the most convenient, but there are others in which the following method of approximation leads to more useful results.

Let be any function of and , and let it be required to find the value of where.

In this expression is the mean value of within the limits of integration.

Let be the value of when and , then, expanding by Taylor's Theorem,

In the case of the coil, let the outer and inner radii be , and respectively, and let the distance of the planes of the windings from the origin lie between and , then the breadth of the coil is , and its depth , these quantities being small compared with or .

In order to calculate the magnetic effect of such a coil we may write the successive terms of the series as follows:—

, |

, |

, |

, |

&c., &c.;

, | |

, | |

, | |

&c., &c. |

*To find* *by Elliptic Integrals.*

701.] When the distance of the circumferences of the two circles is moderate as compared with the radii of the smaller, the series already given do not converge rapidly. In every case, however, we may find the value of for two parallel circles by elliptic integrals.

For let be the length of the line joining the centres of the circles, and let this line be perpendicular to the planes of the two circles, and let and be the radii of the circles, then,

,

, , ,

}} | ||

, |

where

,

.

, ,

,

.

The quantity represents the attraction between two parallel circular currents, the current in each being unity.

*Second Expression for* .

.

*To draw the Lines of Magnetic Force for a Circular Current.*

702.] The lines of magnetic force are evidently in planes passing through the axis of the circle, and in each of these lines the value of is constant.

Calculate the value of from Legendre's tables for a sufficient number of values of .

Draw rectangular axes of and on the paper, and, with centre at the point , draw a circle with radius . For all points of this circle the value of will be . Hence, for all points of this circle,, and .

Now is the value of for which the value of was found. Hence, if we draw a line for which , it will cut the circle in two points having the given value of .

Giving a series of values in arithmetical progression, the values of will be as a series of squares. Drawing therefore a series of lines parallel to , for which has the values found for , the points where these lines cut the circle will be the points where the corresponding lines of force cut the circle.

If we put , and , then.

We may call the index of the line of force.

The forms of these lines are given in Fig. XVIII at the end of this volume. They are copied from a drawing given by Sir W. Thomson in his paper on 'Vortex Motion^{[2]}'.

.

(1)

To prove this, let us consider the number of lines of magnetic force cut by the circle when or is made to vary.

(1) Let become , remaining constant. During this variation the circle, in expanding, sweeps over an annular surface in its own plane whose breadth is .

If is the magnetic potential at any point, and if the axis of be parallel to that of the circle, then the magnetic force perpendicular to the plane of the ring is .

To find the magnetic induction through the annular surface we have to integrate,

.

(2)

(2) Let become , remaining constant. During this variation the circle sweeps over a cylindric surface of radius and length .

The magnetic force perpendicular to this surface at any point is where is the distance from the axis. Hence.

(3)

Differentiating equation (2) with respect to , and (3) with respect to , we get

| , | | (4) | |||

, | (5) | |||||

Hence | , | (6) | ||||

, by (2). |

Transposing the last term we obtain equation (1).

*Coefficient of Induction of Two Parallel Circles when the Distance between the Arcs is Small compared with the Radius of either Circle.*

704.] We might deduce the value of in this case from the expansion of the elliptic integral already given when its modulus is nearly unity. The following method, however, is a more direct application of electrical principles.

*First Approximation.*

= .

Fig. 49.
We have to find , the magnetic induction through the circle , due to a unit current in on the supposition that is small compared with or .

We shall begin by calculating the magnetic induction through a circle in the plane of whose radius is , being a quantity small compared with (Fig. 49).

Consider a small element of the circle . At a point in the plane of the circle, distant from the middle of , measured in a direction making an angle with the direction of <, the magnetic force due to is perpendicular to the plane, and equal to.

.

If is small, the surface-integral for the part of the annular space outside the small circle may be neglected.

We then find for the induction through the circle whose radius is , by integrating with respect to ,,

.

705.] Since the mutual induction between two windings of the same coil is a very important quantity in the calculation of experimental results, I shall now describe a method by which the approximation to the value of for this case can be carried to any required degree of accuracy.

We shall assume that the value of is of the form,

where | | , | | |||

and | , |

where and are the radii of the circles, and the distance between their planes.

We have to determine the values of the coefficients and . It is manifest that only even powers of y can occur in these quantities, because, if the sign of is reversed, the value of must remain the same.

We get another set of conditions from the reciprocal property of the coefficient of induction, which remains the same whichever circle we take as the primary circuit. The value of must therefore remain the same when we substitute for , and for in the above expression.

We thus find the following conditions of reciprocity by equating the coefficients of similar combinations of and ,, | | , | |||

, | | , | |||

, | ; | ||||

, | |||||

. |

,

, |

; |

, |

, |

&c.;

, | ||

, | ||

, |

. |

*To find the form of a coil for which the coefficient of self-induction is a maximum, the total length and thickness of the wire being given.*

,

, and ,

.

,

and ,

whence

;

^{[3]}.

If the channel in which the coil is wound has a square transverse section, the mean diameter of the coil should be times the side of the square section.

- ↑ The value of the solid angle subtended by a circle may be obtained in a more direct way as follows.—
The solid angle subtended by the circle at the point in the axis is easily shewn to be

.Expanding this expression in spherical harmonics, we find

, , - ↑
*Trans. R. S.*, Edin., vol. xxv. p. 217 (1869). - ↑
*Werke*, Göttingen edition, 1867, vol. v. p. 622.