CHAPTER THREE
PRINCIPLES AND RULES OF JAPANESE FLOWER ARRANGEMENT
How the Flowers are Held in Place
THE first step in the arrangement of flowers in Japanese style is to make the support or kubari which holds the flower in an upright position in the vase. This support must be firmly placed in the vase so that it will not slip from side to side before the flowers are put through it.
Almost every school has a different style of support. In some schools the kubari is cut differently for every season of the year. The ones used by Koshin-Ryu are the simplest and are the same throughout the year. They are like the cuts given on page 42.
Take any piece of wood in which the sap is running and which can be bent without
![]() Showing how Flowers are placed in |
![]() Showing how Flowers are placed in |
![]() |
![]() |
Flowers placed in Holder No. 4 |
Showing Flowers placed in |
In placing the support in the vase put the open end at the back of the vase. Place the open end in first and force the stick into a horizontal position with its other end. The support should be at least one inch below the surface of the water when in its proper place; thus it will be entirely hidden from sight and the flowers will appear to be holding their upright position without artificial aid. This kubari is easily made and will be found most useful in making one branch or flower stand upright in a wide-mouthed receptacle.
Another support is made from a forked piece of wood with ends slanted off at different angles. (See Fig. 2.) This is better for large branches which require great strength in the support, but for all flowers and slender branches Fig. 1 is the better. It is often difficult to get a forked stick the proper size. It will either be too large or too small. Whereas the first kubari can be cut to fit the flowers you intend to pass through it and will require no wedges to fill up the unoccupied opening at the back. These wedges, which the beginner often finds necessary to keep his flowers firm in the kubari, are not desirable, as they are untidy and detract from the all-in-one parent-stalk appearance.
If you have no suitable wood at hand from which to make a support, use the ends of the branches or flowers you are arranging, crossed as shown in Fig 5. This is not considered desirable and is used only in an emergency.
These stick supports are used for all flowers and plants placed in high vases, but for water-growing flowers in low receptacles the lead rings and metal holders are used in the ways described later.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/06/Japanese_flower_arrangement_p049.jpg/220px-Japanese_flower_arrangement_p049.jpg)