Case 1:13-cv-01215-TSC Document 239-1 Filed 03/31/22 Page 58 of 187
- Conclusion: Defendant may fairly reproduce this incorporated standard in its entirety.
- ASTM B694 (1986):
- The parties identify 7 C.F.R. § 1755.390 (2010) as the incorporating by reference regulation, see Becker Decl. ¶ 57, Ex. 90; Wise Decl., Ex. 176, which does not incorporate the standard for any specific sections of the Code of Federal Register. See 7 C.F.R. § 1755.390(a)(v)(7). Other sections of 7 C.F.R. § 1755 identifying requirements of ASTM B694 (1986) do not specify that only certain provisions of ASTM B694 (1986) are incorporated by reference into law, nor do they indicate which specific provisions of ASTM B694 (1986) are relevant for compliance with the regulation. See 7 C.F.R. § 1755.390(h)(5)(v) (“The 5-mil copper clad stainless steel tape must be in the fully annealed condition and must conform to the requirements of American Society for Testing and Materials (ASTM) B 694–86, with a cladding ratio of 16/68/16.”); id. § 1755.860(i)(4)(ii) (“Copper alloy 220. The shielding material, prior to application to the wire, must be in the fully annealed condition and shall conform to the requirements of ASTM B 694–86 for C22000 commercial bronze.”); id. § 1755.860(i)(4)(iii) (“Copper-clad stainless steel. In addition to meeting the requirements of paragraph (i)(4)(i) of this section, the shielding material, prior to application to the wire, must be in the fully annealed condition and must conform to the requirements of ASTM B 694–86, with a cladding ratio of 16/68/16 and must have a minimum electrical conductivity of 28 percent IACS when measured in accordance with ASTM B 193–87.”); id. § 1755.860(i)(4)(iv) (“Copper alloy 664. In addition to meeting the requirements of paragraph (i)(4)(i) of this section, the shielding material, prior to application to the wire, must be annealed temper and must conform to the requirements of ASTM B 694–86 and must have a minimum electrical conductivity of 28 percent IACS when measured in accordance with ASTM B 193–87.”); id. § 1755.890(h)(5)(v) (“The 5-mil copper clad stainless steel tape must be in the fully annealed condition and must conform to the requirements of American Society for Testing and Materials (ASTM) B 694–86, with a cladding ratio of 16/68/16.”).
- First Factor: There is no indication that Defendant stands to profit from republishing this standard; Defendant’s apparent purpose is to inform the public about the law and facilitate public debate. See ASTM, 896 F.3d at 449; Def’s 2d Mot. at 16. Defendant’s “attempt to freely distribute standards incorporated by reference into law qualifie[s] as a use that further[s] the purposes of the fair use defense.” ASTM, 896 F.3d at 449. Further, the incorporated standard provides information essential for a private entity to comprehend its legal duties, which weighs heavily in favor of permitting Defendant’s reproduction. See ASTM, 896 F.3d at 450.
- Second Factor: The “express text of the law falls plainly outside the realm of copyright protection.” ASTM, 896 F.3d at 451. Here, the standard is incorporated into law without limitation such that “the consequence of the incorporation by reference is virtually indistinguishable from a situation in which the standard had been expressly copied into law.” Id. at 452. Accordingly, “this factor weighs heavily in favor of fair use.” Id.
- Third Factor: The incorporating regulation does not specify that only certain provisions of this standard are incorporated by reference into law, nor does it indicate which
Page 58 of 187
