possible for a series of closely spaced dots to merge into a continuous line. The diffuseness has the deleterious effect in a vector plotter of bridging small gaps or of filling small openings in the characters. Due allowance must be made in the design of the characters to avoid these unacceptable effects. A gap in a line may be smaller than the opening within a circle without undue bridging or filling.
Dot Size
From densitometer readings it has been determined that the effective diameter of the plotting dot is 2.9 raster units for the S-C 4010 printer. A diameter of 2.3 raster units has been reported6 for the S-C 4020 printer. That the diameter could be as small as one raster unit for the same printer is implied by measurements on the hard copy sample from the S-C 4060 printer. It is evident that the cathode ray printers do not achieve the ultimate in resolving power.
The diameter of the plotting dot in a vector plotter should be a minimum in order to give a maximum control of line thickness. The diameter must be no less than one raster unit in order that solid areas may be swept out. The fineness of strokes which can be printed on current cathode ray printers is limited by dot size and not by raster size.
Raster Size
A line of text in a mathematical document should be long enough so that the mathematical equations which are inserted in the text only rarely need to be broken with part on one line and part on another line. With the model herein adopted for analysis, the length of a line of text is 6″. If this were typewritten in elite style at 12 characters per inch there would be 72 characters per line of text.
9
