This page has been validated.
106
ROTATION OF PLANE OF POLARISATION

diameter; this aperture may be varied by a series of diaphragms. There is a second similar screen with a shelf for the analyser, which is placed with the leaves horizontal. Behind the analyser is the receiver.

In the space between the brass plates is placed the substance to be examined. Previous tests are made to see whether all disturbing causes have been removed. The sensitiveness of the receiver is occasionally tested by interposing one's finger at 45° between the crossed polariser and analyser; this should, by partially restoring the field, produce strong action, provided the receiver is in a fairly sensitive condition.

Care should be taken that there are no metallic masses between the screens, as reflection from metals is found to produce "depolarisation", the rays being then elliptically polarised. The substance to be examined should not, for very delicate experiments, be held by the hand, owing to the disturbing action of the fingers. It is preferable to have the substances supported on stirrups made of thin paper. The above are some of the main precautions to be taken in carrying out the following experiments, where the effects to be detected are very small and therefore likely to be masked unless all disturbing causes are carefully excluded.

I have in a previous communication made mention of the double refracting property of fibrous substances like jute. The field is restored when a bundle of jute is placed at 45° between the crossed polariser and analyser. There is, however, no depolarisation effect when the axis of the bundle is parallel to the direction of the ray.

I now took three similar bundles, A, B and C, of parallel fibres of jute 10 cm. in length and 4.5 cm. in