This page has been validated.
FIRE APPLIANCES]
FIRE AND FIRE EXTINCTION
   417

engine with two cylinders and pistons worked by a reciprocating lever, and Pliny refers to the use of fire-engines in Rome. In the 16th century (as at Augsburg in 1518) we hear of fire squirts or syringes worked by hand, and towards the end of the same century Cyprien Lucar described a very large one operated by a screw handle. The fire squirts used in London about the time of the Great Fire were 3 or 4 ft. long by 21/2 or 3 in. in diameter, and three men were required to manipulate them. The next stage of development was to mount a cistern or reservoir on wheels so that it was portable, and to provide it with pumps which forced out the water contained in it through a fixed delivery pipe in the middle of the machine. An important advance was made in 1672 when two Dutchmen, Jan van der Heyde, senior and junior, made flexible hose by sewing together the edges of a strip of leather, and applied it for both suction and delivery, so that the engines could be continuously supplied with water and the stream could be more readily directed on the seat of the fire. For many years manual engines were the only ones employed, and they came to be made of great size, requiring as many as 40 or 50 men to work them; but now they are superseded by power-driven engines, at least for all important services. The first practical steam fire-engine was made by John Braithwaite about 1829, but though it proved useful in various fires in London for several years after that date, it was objected to by the men of the fire brigade and its use was abandoned. A generation later, however, steam fire-engines began to come into vogue. At first they were usually drawn by horses to the scene of the fire, though exceptionally their engines could be geared to the wheels so that they became self-propelled; and it was not till the beginning of the 20th century that motor fire-engines were employed to any extent. Steam, petrol and electricity have all been used. Such engines have the advantage that they can reach a fire much more rapidly than a horse-drawn vehicle, especially in hilly districts, and they can if necessary be made of greater power, since their size need not be limited by considerations of the weight that can be drawn by horses. Petrol-propelled engines can be started off from a station within a few seconds of the receipt of an alarm, and their pumps are ready to work immediately the fire is reached; steam-propelled engines possess the same advantage, if they are kept always standing under steam, though this involves expense that is avoided with petrol engines, which cost nothing for maintenance except while they are actually working. Motor engines are made with a capacity to deliver 1000 gallons of water a minute or even more, but the sizes than can deal with 400 or 500 gallons a minute are probably those most commonly used.

In towns standing on a navigable water-way fire-boats are often provided for extinguishing fires in buildings, in docks and along the waterside. The capacity of these may rise to 6000 gallons a minute. Steam is the power most commonly used in them, both for propulsion and for pumping, but in one built for Spezia by Messrs Merryweather & Sons of London in 1909, an 80 H. P. petrol engine was fitted for propulsion, while a steam engine was employed for pumping. The boiler was fired with oil-fuel, and steam could be raised in a few minutes while the boat was on its way to a fire. The pumps could throw a 11/2-in. jet to a height of nearly 200 ft. In some places, as at Boston, Mass., the fire-boats are utilized for service at some distance from the water. Fire-mains laid through the streets terminate in deep water at points accessible to the boats, the pumps of which can be connected to them and made to fill them with water at high pressure. In cities where a high-pressure hydraulic supply system is available, a relatively small quantity of the pressure water can be used, by means of Greathead hydrants or similar devices, to draw a much larger quantity from the ordinary mains and force it in jets to considerable heights and distances, without the intervention of any engine.

The water is conducted from the engines or hydrants in hose-pipes, which are made either of leather fastened with brass or copper rivets, or of canvas (woven from flax) which has the merit of lightness but is liable to rot, or of rubber jacketed with canvas (or in America with cotton). For directing the water on the fire, nozzles of various forms are employed, some throwing a plain solid jet, others producing spray, and others again combining jet and spray, the spray being useful to drive away smoke and protect the firemen. Various devices are employed to enable the upper storeys of buildings to be effectively reached. A line of hose may be attached to a telescopic ladder, the extensions of which are pulled out by a wire rope until the top rests on the wall of the building at the required height. Water-towers enable the jet to be delivered at a considerable height independently of any support from the building. A light, stiff, lattice steel frame is mounted on a truck, on which it lies horizontally while being drawn to a fire, but when it has to be used it is turned to an upright position, often by the aid of compressed gas, and then an extensible tube is drawn out to a still greater height. The direction of the stream delivered at the top may be controlled from below by means of gearing which enables the nozzle to be moved both horizontally and vertically. The pipe up the tower may be of large diameter, so that it can carry a huge volume of water, and at the bottom it may terminate in a reservoir into which several fire-engines may pump simultaneously.

Another class of fire-engines, known in the smaller portable sizes as fire-extinguishers or “extincteurs,” and in the larger ones as “chemical engines,” throw a jet of water charged with gas, commonly carbon dioxide, which does not support combustion. Essentially they consist of a closed metal tank, filled with a solution of some carbonate and also containing a small vessel of sulphuric acid. Under normal conditions the acid is kept separate from the solution, but when the machine has to be used they are mixed together; in some cases there is a plunger projecting externally, which when struck a sharp blow breaks the bottle of acid, while in others the act of inverting the apparatus breaks the bottle or causes it to fall against a sharp pricker which pierces the metallic capsule that closes it. As soon as the acid comes into contact with the carbonate solution carbon dioxide is formed, and a stream of gas and liquid mixed issues under considerable pressure from the attached nozzle or hosepipe. Hand appliances of this kind, holding a few gallons, are often placed in the corridors of hotels, public buildings, &c., and if they are well-constructed, so that they do not fail to act when they are wanted, they are useful in the early stages of a fire, because they enable a powerful jet to be quickly brought to bear: but it is doubtful whether the stream of mixed gas and liquid they emit is much more efficacious than plain water, and too much importance can easily be attached to spectacular displays of their power to extinguish artificial blazes of wood soused with petrol, which have been burning only a few seconds. Chemical engines, up to 60 or 70 gallons capacity, are used by fire brigades as first-aid appliances, being mounted on a horsed or motor vehicle and often combined with a fire-escape, a reel of hose, and other appliances needed by the firemen, and even with pumps for throwing powerful jets of ordinary water. Large buildings, such as hotels and warehouses, where a competent watchman is assumed to be always on duty, may be protected by a large chemical engine placed in the basement and connected by pipes to hydrants placed at convenient points on the various floors. At each hose-station a handle is provided which when pulled actuates a device that effects the mixing of the acid and carbonate solution in the machine, so that in a minute or so a stream is available at the hydrants.

Automatic Sprinklers.—Factories, warehouses and other buildings in which the fire risks are great, are sometimes fitted with automatic sprinklers which discharge water from the ceiling of a room as soon as the temperature rises to a certain point. Lines of pipes containing water under pressure are carried through the building near the ceilings at distances of 8 or 10 ft. apart, and to these pipes are attached sprinkler heads at intervals such that the water from them is distributed all over the room. The valves of the sprinklers are normally kept closed by a device the essential feature of which is a piece of fusible metal; this as soon as it is softened (at a temperature of about 160° F.) by the heat from an incipient fire, gives way and releases the water,