in Kinsale, Newry, Crossmaglen and elsewhere. The demand from France for Irish crochet is now far beyond the supply, a condition which leads not only to the rapid repetition by Irish workers of old patterns, but tends also to a gradual debasement of both texture and ornament. Attempts have been made to counteract this tendency, with some success, as the specimens of Irish crochet in figs. 25, 26 and 27 indicate.
Fig. 27.—Lady's Sleeve of Irish Crochet Lace.
An appreciable amount of pillow-made lace is annually supplied from Devonshire, Buckinghamshire, Bedfordshire and Northampton, but it is bought almost wholly for home use. The English laces are made almost entirely in accordance with the precedents of the 19th century—that is to say, in definite lengths and widths, as for borders, insertions and flounces, although large shaped articles, such as panels for dresses, long sleeves complete skirts, jackets, blouses, and fancifully shaped collars of considerable dimensions have of late been freely made elsewhere. To make such things entirely of lace necessitates many modifications in the ordinary methods; the English lace-workers are slow to adapt their work in the manner requisite, and hence are far behind in the race to respond to the fashionable demand. No countries succeed so well in promptly answering the variable call of fashion as France and Belgium.
As regards trade in lace, America probably buys more from Belgium than from France; France and England come next as purchasers of nearly equal quantities, after which come Russia and Italy.
The greatest amount of lace now made is that which issues from machines in England, France and Germany. The total number of persons employed in the lace industry in England in 1871 was 49,370, and in 1901 about 34,929, of whom not more than 5000 made lace by hand.
The early history[1] of the lace-making machine coincides with that of the stocking frame, that machine having been adapted about the year 1768 for producing open-looped fabrics which had a net-like appearance. About 1786 frames for making point nets by machinery first appear at Mansfield and later at Ashbourne and Nottingham and soon afterwards modifications were introduced into such frames in order to make varieties of meshes in the point nets which were classed as figured nets. In 1808 and 1809 John Heathcoat of Nottingham obtained patents for machines for making bobbin net with a simpler and more readily produced mesh than that of the point net just mentioned. For at least thirty years thousands of women had been employed in and about Nottingham in the embroidery of simple ornament on net. In 1813 John Leavers began to improve the figured net weaving machines above mentioned, and from these the lace-making machines in use at the present time were developed. But it was the application of the celebrated Jacquard apparatus to such machines that enabled manufacturers to produce all sorts of patterns in thread-work in imitation of the patterns for hand-made lace. A French machine called the “dentellière” was devised (see La Nature for the 3rd of March 1881), and the patterns produced by it were of plaited threads. The expense, however, attending the production of plaited lace by the “dentellière” is as great as that of pillow lace made by the hand, and so the machine has not succeeded for ordinary trade purposes. More successful results have been secured by the new patent circular lace machine of Messrs. Birkin & Co. of Nottingham, the productions of which, all of simple design, cannot be distinguished from hand-made pillow lace of the same style (see figs. 57, 58, 59).
Before dealing with technical details in processes of making lace whether by hand or by the machine, the component parts of different makes of lace may be considered. These are governed by the ornaments or patterns, which may be so designed, as they were in the earlier laces, that the different component parts may touch one another without any intervening groundwork. But as a wish arose to vary the effect of the details in a pattern ground-works were gradually developed and at first consisted of links or ties between the substantial parts of the pattern. The bars or ties were succeeded by grounds of meshes, like nets. Sometimes the substantial parts of a pattern were outlined with a single thread or by a strongly marked raised edge of buttonhole-stitched or of plaited work. Minute fanciful devices were then introduced to enrich various portions of the pattern. Some of the heavier needle-made laces resemble low relief carving in ivory, and the edges of the relief portions are often decorated with clusters of small loops. For the most part all this elaboration was brought to a high pitch of variety and finish by French designers and workers; and French terms are more usual in speaking of details in laces. Thus the solid part of the pattern is called the toilé or clothing, the links or ties are called brides, the meshed grounds are called réseaux, the outline to the edges of a pattern is called cordonnet or brodé, the insertions of fanciful devices modes, the little loops picots. These terms are applicable to the various portions of laces made with the needle, on the pillow or by the machine.
The sequence of patterns in lace (which may be verified upon referring to figs. 1 to 23) is roughly as follows. From about 1540 to 1590 they were composed of geometric forms set within squares, or of crossed and radiating line devices, resulting in a very open fabric, stiff and almost wiry in effect, without brides or réseaux. From 1590 may be dated the introduction into patterns of very conventional floral and even human and animal forms and slender scrolls, rendered in a tape-like texture, held together by brides. To the period from 1620 to 1670 belongs the development of long continuous scroll patterns with réseaux and brides, accompanied in the case of needle-made laces with an elaboration of details, e.g. cordonnet with massings of picots. Much of these laces enriched with fillings or modes was made at this time. From 1650 to 1700 the scroll patterns gave way to arrangements of detached ornamental details (as in Pl. VI. fig. 22): and about 1700 to 1760 more important schemes or designs were made (as in Pl. fig. 19, and in fig. 24 in text), into which were introduced naturalistic renderings of garlands, flowers, birds, trophies, architectural ornament and human figures. Grounds composed entirely of varieties of modes as in the case of the réseau rosacé (Pl. V. fig. 21) were sometimes made then. From 1760 to 1800 small details consisting of bouquets, sprays of flowers, single flowers, leaves, buds, spots and such like were adopted, and sprinkled over meshed grounds, and the character of the texture was gauzy and filmy (as in figs. 40 and 42). Since that time variants of the foregoing styles of pattern and textures have been used according to the bent of fashion in favour of simple or complex ornamentation, or of stiff, compact or filmy textures.
Fig. 28.Fig. 29.
Needlepoint Lace.—The way in which the early Venetian “punto in aria” was made corresponds with that in which needlepoint lace is now worked. The pattern is first drawn upon a piece of parchment. The parchment is then stitched to two pieces of linen. Upon the leading lines drawn on the parchment a thread is laid, and fastened through to the parchment and linen by means of stitches, thus constructing a skeleton thread pattern (see left-hand part of fig. 30). Those portions which are to be represented as the “clothing” or toilé are usually worked as indicated in the enlarged diagram (fig. 29), and then edged as a rule with buttonhole stitching (fig. 28). Between these toilé portions of the pattern are worked ties (brides) or meshes (réseaux), and thus the various parts united into one fabric are wrought on to the face of the parchment pattern and reproducing it (see right-hand part of fig. 30). A knife is
- ↑ See Felkin’s Machine-wrought Hosiery and Lace Manufactures.
