This page has been proofread, but needs to be validated.
PLASTER–WORK
785


though it is not so strong as ox-hair. The quantity used in good work is one pound of hair to two or three cubic feet of coarse stuff .

Manila hemp fibre has been used as a substitute for hair.Substitutes for Hair. As a result of experiments to ascertain its strength as compared with that of other materials, it was found that plaster slabs made with Manila hemp fibre broke at 195 lb, plaster mixed with Sisal hemp at 150 lb, Jute at 145 lb, and goats' hair at 1441/2 lb. Another test was made in the following manner. Two barrels of mortar were made up of equal proportions of lime and sand, one contain in the usual quantity of goats' hair, and the other Manila fibre. After remaining in a dry cellar for nine months the barrels were opened. It was found that the hair had been almost entirely eaten away by the action of the lime, and the mortar consequently broke up and crumbled quite easily. The mortar containing the Manila hemp, on the other hand, showed great cohesion, and required some effort to pull it apart, the hemp fibre being apparently quite uninjured. Sawdust has been used as a substitute for hair and also instead of sand as an aggregate. It will enable mortar to stand the effects of frost and rough weather. It is useful sometimes for heavy cornices and similar work, as it renders the material light and strong. The sawdust should be used dry.

Some remarks are made on the ordinary sands for building in the articles on Brickwork and Mortar.Sand. For fine plasterer's work special sands, not hitherto referred to, are used, such as silver sand, which is used when a light colour and fine texture are required. In England this fine white sand is procured chiefly from Leighton Buzzard.

For external work Portland cement is undoubtedly the best material on account of its strength, durability, and weather resisting properties.External Work. The first coat or rendering is from 1/2 to 3/4 in. thick, and is mixed in the (proportions of from one part of cement to two of sand to one art to five of sand. The finishing or setting coat is about 3/16 in. thick, and is worked with a hand float on the surface of the rendering, which must first be well wetted.

Stucco is a term loosely applied to nearly all kinds of external plastering, whether composed of lime or of cement.Stucco At the present time it has fallen into disfavour, but in the early part of the 19th century a great deal of this work was done. The principal varieties of stucco are common, rough, trowelled and bastard. Cement has largely superseded lime for this work. Common stucco for external work is usually composed of one part hydraulic lime and three parts sand. The wall should be sufficiently rough to form a key and well wetted to prevent the moisture being absorbed from the plaster.

Rough stucco is used to imitate stonework. It is worked with a hand float covered with rough felt, which forms a sand surface on the plaster Lines are ruled before the stuff is set to represent the joints of stonework. Trowelled stucco, the finishing coat of this work, consists of three parts sand to two parts fine stuff. A very fine smooth surface is produced by means of the hand float. Bastard stucco is of similar composition, but less labour is expended on it. It is laid on in two coats with a skimming float, scoured off at once, and then trowelled. Coloured stucco: lime stucco may be executed in colours, the desired tints being obtained by mixing with the lime various oxides. Black and greys are obtained by using forge ashes in varying proportions, greens by green enamel, reds by using litharge or red lead, and blues by mixing oxide or carbonate of copper with the other materials.

Rough-cast or Pebble-dash plastering is a rough form of external plastering in much use for country houses. In Scotland it is termed “harling” it is one of the oldest forms of external plastering in Tudor times it was employed to fill in between the woodwork of hall-timbered framing. When well executed with good material this kind of plastering is very durable. Rough-casting is performed by first rendering the wall or laths with a coat of well haired coarse stuff composed either of good hydraulic lime or of Portland cement. This layer is well scratched to give a key for the next coat, which is also composed of coarse stuff knocked up to a smooth and uniform consistency. While this coat is still soft, gravel, shingle or other small stones are evenly thrown on with a small scoop and then brushed over with thin lime mortar to give a uniform surface. The shingle is often dipped in hot lime paste, well stirred up, and used as required.

Sgraffito (Italian for “scratched”) is scratched ornament in plaster Scratched ornament is the oldest form of surface decoration, and at the present day it is much used on the continent of Europe, especially in Germany and Italy, in both external and internal situations. Properly treated, the work is durable, effective and inexpensive. The process is carried out in this way: A first coat or rendering of Portland cement and sand, in the proportion of one to three, is laid on about 1/2 in. thick; then follows the colour cost, sometimes put on in patches of different tints as required for the finished design. When this coat is nearly dry, it is finished with a smooth-skimming, 1/12; to 1/8 in. thick, of Parian, selenitic or other fine cement or lime, only as much as can be finished in one day being laid on Then by pouncing through the pricked cartoon, the design is transferred to the plastered surface. Broad spaces of background are now exposed by removing the finishing coat, thus revealing the coloured plaster beneath, and following this the outlines of the rest of the design are scratched with an iron knife through the outer skimming to the underlying tinted surface. Sometimes the coats are in three different colours, such as brown for the first, red for the second, and white or grey for the final coat. The pigments used for this work include Indian red, Turkey red, Antwerp blue, German blue, umber, ochre, purple brown, bone black or oxide of manganese for black. Combinations of these colours are made to produce any desired tone.

Lime plastering is composed of lime, sand, hair and water in proportions varying according to the nature of the work to be done. Internal Work.In all cases good materials, well mixed and skilfully applied, are essential to a perfect result. Plaster is applied in successive coats or layers on walls or lathing and gains its name from the number of these coats. “One coat” work is the coarsest and cheapest class of plastering, and is limited to inferior buildings, such as outhouses, where merely a rough coating is required to keep out the weather and draughts. This is described as “render” on brickwork, and “lath and lay” or “lath and plaster one coat” on studding. “Two coat” work is often used for factories or warehouses and the less important rooms of residences. The first coat is of coarse stuff finished fair with the darby float and scoured. A thin coat of setting stuff is then laid on, and trowelled and brushed smooth. “Two coat” work is described as “render and set” on walls, and “lath, plaster and set," or “lath, lay and set” on laths. “Three coat” work is usually specified for all good work. It consists, as its name implies, of three layers of material, and is described as “render, float and set” on walls and “ lath, plaster, float and set,” or “lath, lay, float and set,” on lathwork. This makes a strong, straight, sanitary coating for walls and ceilings. The process for “three coat" work is as follows: For the first coat a layer of well-haired coarse stuff, about 1/2 in. thick, is put on with the laying trowel. This is termed “pricking up” in London, and in America “scratch coating.” It should be laid on diagonally, each trowelful overlapping the previous one. When on laths the stuff should be plastic enough to be worked through the spaces between the laths to form a key, yet so firm as not to drop off. The surface while still soft is scratched with a lath to give a key for the next coat, which is known as the second or “floating coat, ” and is 1/4 to 3/8 in. thick. In Scotland this part of the process is termed “straightening” and in America “browning," and is performed when the first coat is dry, so as to form a straight surface to receive the finishing coat. Four operations are involved in laying the second coat, namely, forming the screeds; filling in the spaces between the screeds; scouring the surface; keying the face for finishing. Wall screeds are plumbed and ceiling screeds levelled. Screeds are narrow strips of plastering, carefully plumbed and levelled, so as to form a guide upon which the floating rule is run, thus securing a perfectly horizontal or vertical surface, or, in the case of circular work, a uniform curve.

The “filling in,” or “flanking," consists of laying the spaces between the screeds with coarse stuff, which is brought flush with the level of the screeds with the floating rule.

The “scouring” of the floating coat is of great importance, for it consolidates the material, and, besides hardening it, prevents it from cracking. It is done by the plasterer with a hand float which he applies vigorously with a rapid circular motion, at the same time sprinkling the work with water from a stock brush in the other hand. Any small holes or inequalities are filled up as he proceeds. The whole surface should be uniformly scoured two or three times, with an interval between each operation of from six to twenty-four hours. This process leaves the plaster with a close-grained and fairly smooth surface, offering little or no key to the coat which is to follow. To obtain proper cohesion, however, a roughened face is necessary, and this is obtained by “keying” the surface with a wire brush or nail float, that is, a hand float with the point of a nail sticking through and projecting about 1/8 in.; sometimes a point is put at each corner of the float. After the floating is finished to the walls and ceiling, the next part of internal plastering is the running of the cornice, followed by the finishing of the ceiling and walls.

The third and final coat is the “setting coat,” which should be about 1/8 in. thick. In Scotland it is termed the “finishing,” and in America the “hard finish” or “putty coat.” Considerable skill is required at this juncture to bring the work to a perfectly true finish, uniform in colour and texture. Setting stuff should not be applied until the floating is quite firm and nearly dry, but it must not be too dry or the moisture will be drawn from the setting stuff. The coarse stuff applied as the first coat is composed of sand and lime, usually in proportions approximating to two to one, with hair mixed into it in quantities of about a pound to two or three cubic feet of mortar. It should be mixed with clean water to such a consistency that a quantity picked up on the point of a trowel holds well together and does not drop.

Floating stuff is of finer texture than that used for “pricking up,” and is used in a softer state, enabling it to be worked well into the keying of the first coat. A smaller proportion of hair is also used.

Fine stuff mixed with sand is used for the setting coat. Fine