This page has been validated.
AND HOW TO USE THEM.
151

color side down, between the tracing paper and the material to be stamped. Go over the lines of the design with a sharp pointed hard lead pencil, a dull stiletto, or some similar utensil. Slip your transfer paper along so as to go over every line of the design. Before removing the thumb tacks entirely, lift the tracing paper and examine whether the design has been thoroughly transferred.

In using transfer paper be careful about using a new piece on handsome goods as the color comes off in undesirable places.

When possible, it is far better, however, to draw your pattern directly on the material, sketching it at first lightly and when all is correct, going over the lines with either India ink, or with a common pen and ink.

For very handsome material, it is safer and more convenient to have the stamping done by those who make a business of it. As there are some, however, who cannot conveniently have this done, I will give another method called pouncing. Having drawn or transferred the pattern on to stiff drawing paper, prick the outlines carefully with a sharp knitting needle, or stiletto or stitch it on the machine, using a rather coarse needle. Then having very carefully and firmly fastened it in position, brush flour, or starch (if the ground be dark), or powdered bluing, or artists' charcoal over the lines. It can be put on with a soft brush or flannel pad. Remove the pattern carefully, and go over the lines with a fine paint brush, or stiff pen with India ink or some suitable water color. If the latter is used a little gum in the water used for mixing the color will ensure you against the rubbing out of the lines. Brush off the superfluous powder and your pattern is secure.

Designs can be easily enlarged in this way.

Cut a piece of paper the size of the space to be decorated, preserving the proportion between length and