This page has been proofread, but needs to be validated.

CHAPTER III

The Technique of the Baton


THE BATON ITSELFBefore giving actual directions for the manipulation of the conductor's baton, it may be well to state that the stick itself should be light in weight, light in color, and from sixteen to twenty inches long. It must be thin and flexible, and should taper gradually from the end held in the hand to the point. Batons of this kind can be manufactured easily at any ordinary planing mill where there is a lathe. The kinds sold at stores are usually altogether too thick and too heavy. If at any time some adulating chorus or choir should present the conductor with an ebony baton with silver mountings, he must not feel that courtesy demands that it should be used in conducting. The proper thing to do with such an instrument is to tie a ribbon around one end and hang it on the wall as a decoration.

THE CONDUCTOR'S MUSIC STANDA word about the music desk may also be in order at this time. It should be made of wood or heavy metal so that in conducting one need not constantly feel that it is likely to be knocked over. The ordinary folding music stand made of light metal is altogether unsuitable for a conductor's use. A good substantial stand with a metal base and standard and wood top can be purchased for from three to five dollars from any dealer in musical instruments. If no money is available and the stand is constructed at home, it may be well to note that the base should be heavy, the upright about three