To set it up, cut three small saplings one of which should be twelve feet long and the other two, ten feet long. Tie these two together at the ends making what the sailors call a "shears." Take the twelve-foot pole and run it down the ridge inside the tent, and out through the hole in the back. Now raise the ridge pole with one end stuck in the ground and the front end resting on the two shear poles and tie all three of them together. At the end of each seam the hem you must work in a little eyelet hole for a short piece of twine to tie to the tent pegs. Stretch out the back triangle, pegging it down at the two corners
Forester tent with hood
on the ground, and then peg out each hole along the foot until the entire tent stretches out taut as in our illustrations. Three feet from the peak along the front edge you must have another eyelet hole with a little piece of twine and you tie this out to the shear pole on each side which gives the tent the peculiar gambrel roof which it has, and which has the advantage of giving you lots more room inside than the straight tent would. You now have what is known as the "open" forester tent.
If a thunder storm comes up with a driving rain it will surely rain in at the front unless you turn the tent and by moving the poles one at a time. If you don't want to do this you can make a hood for the front out of the two yards of canvas you have left. Simply draw a diagonal from one corner to the other of this
