easily explained without entering into particulars of mineralogical detail.[1]
(40.) Ex. 5. (35.) III. Hardly less simple and efficacious is the process used in some parts of France, where mill-stones are made. When a mass of stone sufficiently large is found, it is cut into a cylinder several feet high, and the question then arises how to subdivide this into horizontal pieces so as to make as many mill-stones. For this purpose horizontal indentations or grooves are chiselled out quite round the cylinder, at distances corresponding to the thickness intended to be given to the mill-stones, into which wedges of dried wood are driven. These are then wetted, or exposed to the night dew, and next morning the different pieces are found separated from each other by the expansion of the wood, consequent on its absorption of moisture; an irresistible natural power thus accomplishing, almost without any trouble, and at no expense, an operation which, from the peculiar hardness and texture of the stone, would otherwise be impracticable but by the most powerful machinery or the most persevering labour.
(41.) Ex. 6. (35.) III. To accomplish our ends quickly is often of, at least, as much importance as to accomplish them with little labour and expense. There are innumerable processes which, if left to themselves, i. e. to the ordinary operation of natural causes, are done, and well done, but with extreme
- ↑ Such a block would weigh between four and five hundred thousand pounds. See Dr. Kennedy's "Account of the Erection of a Granite Obelisk of a Single Stone about Seventy Feet high, at Seringapatam."—Ed. Phil . Trans . vol. ix. p. 312.
