There was a problem when proofreading this page.
FITTINGS AND FURNITURE
101
with rounded edge and polished surface, a little smaller than the shelf upon which it is to be used. A fine spring of steel is attached by screws and nuts in a slot on one side, so that the length from end of spring to foot of brace is about half an inch more than the space between the shelves where it is to be used. The foot of the brace is placed against the
An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Library Construction, Architecture, Fittings, and Furniture.djvu/125}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. |
books, with the spring outward. On raising it to a vertical position the tip of the spring is pushed along the under side of the shelf above, and so keeps it firmly in position. The end of the spring is slightly curved to facilitate its removal, and when a book is taken away, it is easily pushed forward; the accompanying illustration, Fig. 42, shows how it is worked.