There was a problem when proofreading this page.
FITTINGS AND FURNITURE
115
news-rooms for holding back numbers of newspapers is the "Banbury," shown in Fig. 54. It is made in polished wood, with nickel-plated metal-work. The spring arm, when pulled down, stands out at
An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Library Construction, Architecture, Fittings, and Furniture.djvu/139}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image]  | |
An image should appear at this position in the text. A high-res raw scan of the page is available. To use it as-is, as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Library Construction, Architecture, Fittings, and Furniture.djvu/139}}". If it needs to be edited first (e.g. cropped or rotated), you can do so by clicking on the image and following the guidance provided. [Show image] | |
right angles, and forms a support for the papers, leaving them free to be turned over until the one required is found. The wire-work may be obtained separately, and a series of them can then be screwed to a suitable upright.
