Page:Miscellaneous Papers on Mechanical Subjects.djvu/43

This page has been proofread, but needs to be validated.
OF SCREW THREADS.
35

This, however, is an obvious reason why the attention of engineers should, without loss of time, be directed to the subject.

It will probably occur to practical men that there are other obstacles to be surmounted before the principle of uniformity can be carried into full operation. The great want of accuracy in screwing and tapping by the ordinary process may be particularly mentioned. To whatever extent this may prove an obstruction, it may be also regarded as an additional motive for urging the subject on general attention. The necessity for greater correctness will thus be placed in a new and stronger light, and the effect no doubt will be a material improvement in this essential respect. It is mainly for want of accuracy that screw bolts so frequently fail. Unless the threads of the screw and nut exactly correspond in every part, and coalesce throughout their whole length and depth, their mutual action is completely deranged, power and strength are both sacrificed, and friction is proportionally increased. The immense consumption of bolts and nuts in fitting up and working machinery may give some idea of the extent to which greater accuracy might be productive of economy.

To maintain uniformity, provision must be made for multiplying standards of the diameters and threads. This may be easily done, and will

D 2