absolutely essential for its support; and the strengthening ribs must be placed with reference to the supports. I cannot impress too strongly on the members of the Institution, and upon all in any way connected with mechanism, the vast importance of possessing a true plane, as a standard for reference. All excellence in workmanship depends upon it. I may mention that it was at the meeting of the British Association held in Glasgow in 1840 that I read a paper on the mode of producing a true plane, to which I would refer those desiring information on the subject.[1]
Next in importance to a true plane is the power of measurement. I have brought with me, for your inspection at the close of the meeting, a small machine, by which a difference in length of the one-millionth part of an inch is at once detected. The principle is that of employing the sense of touch, instead of sight. If any object be placed between two parallel true planes, adjusted so that the hand can just feel them in contact, you will find, on moving the planes only the 50-thousandth of an inch nearer together, that the object is distinctly tighter, requiring greater force to move it between them. In the machine before you, the object to be measured is the standard inch, in the form of a small
- ↑ See ante pages 3–19
