Page:Motors and motor-driving (1902).djvu/358

This page has been proofread, but needs to be validated.
326
MOTORS AND MOTOR-DRIVING

exactly the same way as set out in the explanation of changing from the first to the second speed. It will be well if some long runs be taken at this stage, no speed higher than the third being attempted. When this stage is reached, it will be found very much better to take four or five drives of ten miles each, with half an hour or an hour's stoppage between, rather than one continuous drive of forty or fifty miles. Much more rapid progress will be made in this way, and the mental and physical strain is then not noticed, whereas if one long ride is attempted straight off, the novice, when he gets down from the car, will feel uncomfortably tired and exhausted. The next day, if possible, more driving should be undertaken, but this time on the second speed, first directing the steering with one hand and then with the other, so that perfect control can be exercised with either hand, the hand that is more or less at liberty being engaged in taking articles out of the pocket, &c., adjusting the lubricators, pumping oil into the cylinders, and other small details of this sort, which at times it is expedient to do when actually on a journey. One can never feel at all secure until either hand will do all that is necessary with regard to steering. When one is thoroughly familiar with steering with one hand on the second speed, then higher speed can be attempted.

How to Change Speed properly.—In changing speeds there are various things to be avoided, and the learner will very quickly realise that it is most difficult, if not well nigh impossible, to change speed without withdrawing the clutch; which operation is performed by pressing down the left pedal. In any case if he does succeed in the attempt, it will be at the expense of a great deal of noise and damage to the teeth of the gear-wheels. Under all circumstances the teeth are made to engage with one movement, and if at the beginning it is found that when attempting to change speed a grinding noise is heard, it is best to stop the car completely and not persevere, but change the speed quietly with the car standing stationary. When this has been done, and it is brought absolutely home to the learner that the speed can be changed, then he must revert