TOLUENE-2,4-DIISOCYANATE: METHOD 2535, Issue 2, dated 15 August 1994 - Page 5 of 5 APPENDIX B: Preparation of 2,4-TDIU [8] Dissolve 1.03 g (0.00446 mole) N-[(4-nitrophenyl)methyl]-propylamine hydrochloride in 25 mL water in a 125-mL separatory funnel. Add 15 mL 1 M NaOH and shake the mixture. Extract the N-[(4-nitrophenyl)methyl]propylamine with 50 mL toluene, and separate the phases. Add a solution of 262 µL (321 mg, 0.00184 mole) 2,4-TDI in 30 mL toluene to the solution of N-[(4-nitrophenyl)methyl]propylamine. Collect the precipitate by filtration. Purify the product by dissolving it in a small volume of dichloromethane and precipitating it with hexane. Dry the product in vacuo (MP = 136 to 139 °C).
APPENDIX C: Preparation of Reagent-Coated Glass Wool Dissolve 300 mg (0.00130 mole) N-[(4-nitrophenyl)methyl]propylamine hydrochloride in 25 mL water in a 125-mL separatory funnel. Add 15 mL 1 M NaOH and shake the mixture. Extract the N-[(4-nitrophenyl)-methyl]propylamine with 50 mL hexane. Transfer 40 mL of the hexane solution to a 50-mL beaker which is wrapped with aluminum foil and contains 1.82 g silanized glass wool. Under dim light, evaporate hexane from the beaker with the aid of a stream of nitrogen. Knead the glass wool with a glass rod to produce a uniform coating. Continue to evaporate hexane until the glass wool appears dry. Protect the coated glass wool from bright light. The quantity of coated glass wool is sufficient for the preparation of the front and back sections for twenty samplers.
NIOSH Manual of Analytical Methods (NMAM), Fourth Edition, 8/15/94
