ZINC OXIDE: METHOD 7502, Issue 2, dated 15 August 1994 - Page 5 of 5 REFERENCES: [1] NIOSH Manual of Analytical Methods, 2nd. ed., V. 1, P&CAM 222, U.S. Department of Health, Education, and Welfare, Publ. (NIOSH) 77-157-A (1977). [2] Zinc Oxide Fume, S316, Backup Data Report, NIOSH Contract No. 210-76-0123, available as "Ten NIOSH Analytical Methods, Set 3," Order No. PB 275-834 from National Technical Information Service, Springfield, VA 22161. [3] Haartz, J. C., M. L. Bolyard and M. T. Abell. Quantitation of Zinc Chloride and Zinc Oxide in Airborne Samples, paper presented at the American Industrial Hygiene Conference, Minneapolis, MN (June, 1975). [4] Dollberg, D. D., M. T. Abell and B. A. Lange. Occupational Health Analytical Chemistry: Quantitation Using X-Ray Powder Diffraction, ACS Symposium Series, 120, 43 (1980). [5] NIOSH Manual of Analytical Methods, 2nd ed., V. 4, S316, U.S. Department of Health, Education, and Welfare, Publ. (NIOSH) 78-175 (1979). [6] Criteria for a Recommended Standard...Occupational Exposure to Zinc Oxide, U.S. Department of Health, Education, and Welfare, Publ. (NIOSH) 76-104 (1975). [7] Altree-Williams, S., J. Lee and N. V. Mezin. Quantitative X-ray Diffraction on Respirable Dust Collected on Nuclepore Filters, Annals of Occup. Hyg., 20, 109 (1977). [8] Leroux, J. and C. Powers. Direct X-Ray Diffraction Quantitative Analysis of Quartz in Industrial Dust Films Deposited on Silver Membrane Filters, Occup. Health Rev., 21, 26 (1970). [9] Williams, D. D. Direct Quantitative Diffractometric Analysis, Anal. Chem., 31, 1841 (1959). [10] NIOSH Research Report-Development and Validation of Methods for Sampling and Analysis of Workplace Toxic Substances, U.S. Department of Health and Human Services, Publ. (NIOSH) 80-133 (1980).
METHOD WRITTEN BY: D. D. Dollberg, Ph.D, and M. T. Abell, NIOSH/DPSE.
NIOSH Manual of Analytical Methods (NMAM), Fourth Edition, 8/15/94
