[19] or other technique that ensures cassette parts mate evenly and positively to prevent leakage. Seal the filter holder with plastic tape or a shrinkable cellulose band to reduce contamination during filter removal.
(3) Remove the filter holder plugs and attach the filter holder to the personal sampling pump with a piece of flexible tubing. Clip the filter holder to the worker's lapel. Air being sampled should not be passed through any hose or tubing before entering the filter holder.
(4) Prepare the field blanks at about the same time as sampling is begun. These field blanks should consist of unused filters and filter holders from the same lot used for sample collection. Handle and ship the field blanks exactly as the samples, but do not draw air through the field blanks. Two field blanks are required for each 10 samples with a maximum of 10 field blanks per sample set.
(5) Sample at a flow rate of 1 to 3 L/min until the recommended sample volume is reached. Set the flow rate as accurately as possible (e.g., within ± 5%) using the personal sampling pump manufacturer's directions. Take two to four replicate samples for quality control for each set of field samples.
(6) Observe the sampler frequently and terminate sampling at the first evidence of excessive filter loading or change in personal sampling pump flow rate. (It is possible for a filter to become plugged by heavy particulate loading or by the presence of oil mists or other liquids in the air.)
(7) Disconnect the filter holder after sampling. Cap the inlet and outlet of the filter holder with plugs. Label the sample. Record pertinent sampling data including times of beginning and end of sampling, initial and final air temperatures, relative humidity and atmospheric pressure or elevation above sea level. Record the type of personal sampling pump used and location of sampler.
(8) Ship the samples to the laboratory as soon as possible in a suitable container designed to prevent damage in transit. Ship bulk material to the laboratory in a glass container with a PTFE-lined cap. Never store, transport or mail the bulk sample in the same container as the samples or field blanks. In addition to the samples and field blanks, ship five unopened samplers from the same lot for use as media blanks.
d. Sampling Instructions for Filter + Cyclone Sampler
Use these instructions for personal sampling of respirable aerosols (ACGIH definition [20]). Methods requiring these instructions specify CYCLONE + FILTER as the sampling method.
(1) Calibrate the pump to the rate specified by the cyclone (1.7 L/min for the 10-mm nylon cyclone, 2.2 L/min for the Higgins-Dewell cyclone [21], or 2.5 L/min for the aluminum cyclone), with a representative cyclone sampler in line using a bubble meter or a secondary flow measuring device which has been calibrated against a
