Page:NIOSH Manual of Analytical Methods - Chapter D.pdf/18

This page has been validated.

eds. NIOSH Manual of Analytical Methods (NMAM), 4th ed. Cincinnati, OH: National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 94-113.

[8] Lippmann M [1995]. Filters and Filter Holders. In: Cohen BS, Hering SV, Eds. Air Sampling Instruments, 8th ed. Cincinnati, OH: ACGIH, pp. 247 - 278.

[9] Cassinelli ME [1991]. Development of a solid sorbent monitoring method for chlorine and bromine with determination by ion chromatography. Appl Occup Environ Hyg 6:215-226.

[10] Chen CC, Baron PA [1996]. Aspiration Efficiency and Wall Deposition in the Fiber Sampling Cassette, ”Am Ind Hyg Assos J, 52: 142-152.

[11] Foerst D [1979]. A Sampling and Analytical Method for Vinylidene Chloride in Air. Am Ind Hyg Assoc J, 40:, 888-893.

[12] Lee KW, Ramamurthi M [1993]. Filter Collection. In: Willeke KW, Baron PA, Eds. Aerosol Measurement. New York: Van Nostrand Reinhold.

[13] Eller PM [1986]. Operational Limits of Air Analysis Methods. Appl Ind Hyg 1(2): 91–94.

[14] Woebkenberg ML, McCammon CS [1995]. Direct-Reading Gas and Vapor Instruments. In: Cohen BS, Hering SV, Eds. Air Sampling Instruments, 8th ed. Cincinnati, OH: ACGIH, pp 439-510.

[15] Enviro Control, Inc. [1981]. Assessment of Engineering Control Monitoring Equipment, Final Report, NIOSH Contract 210-79-0011, available from NTIS, Springfield, VA 22161 as Order Nos. PB83-152629 (Vol. 1) and PB83-152637 (Vol. 2).

[16] Woebkenberg ML, Woodfin WJ [1983]. NIOSH-developed systems for monitoring equipment evaluations. In: Proceedings of third annual national symposium on recent advances in the measurement of pollutants in ambient air and stationary sources. Raleigh, NC: EPA-600/9-84-00 (1983).

[17] Busch KA, Leidel NA, Statistical Models for Occupational Exposure Measurements and Decision Making. In: Advances in Air Sampling, ACGIH. Chelsea, MI: Lewis Publishers, pp 319-336.

[18] Kovein RJ, Hentz PA [1988]. A Digital Current Capacity Tester for Rechargeable Batteries. Appl Ind Hyg 3(2):51-54.

[19] Okladek J [1988]. An Overview of Flow Metering Devices. Amer Lab 20:84-90.

[20] Frazee PR, Tironi G [1987]. A Filter Cassette Assembly Method for Preventing Bypass Leakage. Am Ind Hyg Assoc J, 48:176-180.

[21] ACGIH [1996]. 1996 TLVs® and BEIs® Threshold Limit Values for Chemical Substances and Physical Agents and Biological Exposure Indices. Cincinnati, OH: American Conference of Governmental Industrial Hygienists, pp. 45-48.

[22] Higgins RLJ, Dewell P [1967]. A Gravimetric Size Selecting Personal Dust Sampler. In: Davies CN, Ed. Inhaled Particles and Vapors ll, Oxford: Pergammon Press, pp. 575-586.

[23] Feldman R [1997]. A Jarless Method for the Calibration of Cyclone Assemblies. Unpublished information, Occupational Safety and Health Administration, Cincinnati, OH.

1/15/98
34
NIOSH Manual of Analytical Methods