term is meant anything more than welding ice by heat, or of joining its parts by a process analogous to that which is called burning together two separate portions of a bronze statue, has always appeared to me unsatisfactory.
The process of "burning together" is as follows:—Two portions of a large statue, which have been cast separately, are placed in a trough of sand, with their corresponding ends near to each other. A channel is made in the sand, leading through the junction of the parts to be united.
A stream of melted bronze is now allowed to run out from the furnace through the channel between the contiguous ends which it is proposed to unite. The first effect of this is to heat the ends of the two fragments. After the stream of melted metal has continued some time, the ends of those fragments themselves begin to melt. When a small quantity of each end is completely melted, the further flow of the melted metal is stopped, and as soon as the pool of melted metal connects, the two ends of the pieces to be united begins to consolidate: the whole is covered up with sand and allowed to cool gradually. When cold, the unnecessary metal is cut away, and the fragments are as perfectly united as if they had been originally cast in one piece.
The sudden consolidation, by physical force, of pounded ice or snow appears to me to arise from the first effect of the pressure producing heat, which melts a small portion into water, and brings the particles of ice or snow nearer to each other. The portion of water thus produced then, having its heat abstracted by the ice, connects the particles of the latter more firmly together by freezing.
If two flat surfaces of clear ice had a heated plate of metal put between them, two very thin layers of water would be formed between the ice and the heated plate. If the hot
