Page:Self-help with illustrations of conduct and perseverance (IA selfhelpwithillu00smiliala).pdf/270

an etching needle; the latter I spoiled before I knew its use. While working at the plate, the Amalgamated Society of Engineers offered a premium for the best design for an emblematical picture, for which I determined to compete, and I was so fortunate as to win the prize. Shortly after this I removed to Blackburn, where I obtained employment at Messrs. Yates', engineers, as an engine-smith; and continued to employ my leisure time in drawing, painting, and engraving, as before With the engraving I made but very slow progress, owing to the difficulties I experienced from not possessing proper tools. I then determined to try to make some that would suit my purpose, and after several failures I succeeded in making many that I have used in the course of my engraving. I was also greatly at a loss for want of a proper magnifying glass, and part of the plate was executed with no other assistance of this sort than what my father's spectacles afforded, though I afterwards succeeded in obtaining a proper magnifier, which was of the utmost use to me. An incident occurred while I was engraving the plate which had almost caused me to abandon it altogether. It sometimes happened that I was obliged to lay it aside for a considerable time, when other work pressed; and in order to guard it against rust, I was accustomed to rub over the graven parts with oil. But on examining the plate after one of such intervals, I found that the oil had become a dark sticky substance extremely difficult to get out. I tried to pick it out with a needle, but found that it would almost take as much time as to engrave the parts afresh. I was in great despair at this, but at length hit upon the expedient of boiling it in water con-