be seen by referring to the data entered on face of note sheet, Fig. 2 (page 151).
In this case, instead of observing, first, the "time to fill a shovel," and then the time to "throw it into a wheelbarrow," etc., a number of these more rudimentary operations are grouped into the single operation of
a="Time filling a wheelbarrow with any material."
This group of operations is thus studied as whole.
Another illustration of the degree of subdivision which is desirable will be found by referring to the inserts, Fig. 5 (opposite page 166).
Where a general study is being made of the time required to do all kinds of hand work connected with and using machine tools, the items printed in detail should be timed singly.
When some special job, not to be repeated many times, is to be studied, then several elementary items can be grouped together and studied as a whole, in such groups for example as:
(a) Getting job ready to set.
(b) Setting work.
(c) Setting tool.
(d) Extra hand work.
(e) Removing work.
And in some cases even these groups can be further condensed.
An illustration of the time units which it is desirable to sum up and properly record and index for a certain kind of lathe work is given in Fig. 6.
