applicable to them; and there appears no valid reason why, for the sake of convenience, the same term should not be extended to their ancient analogues, especially as their edges, as will subsequently be seen, are in many cases worn away in a manner indicative of their having been used for scraping.
The names of "thumb-flints" and "finger-flints" which have sometimes been applied to the shorter and longer varieties of these instruments, though colloquially convenient, appear to me not sufficiently definite in meaning to be worthy of being retained.
Scrapers may be classified and described—firstly, in accordance with the character of the flakes from which they have been made; and, secondly, in accordance with the outline of the portion of the margin which has been chipped into form, and the general contour of the implement.
Their outline is in some cases horseshoe-shaped or kite-shaped, in others it is discoidal or nearly circular, and in others again it may be compared with that of a duck's bill or of an oyster-shell. To these may be added side-scrapers, or such as are broader than they are long, and the hollow scrapers with a rounded notch in them instead of a semicircular end.
Fig. 204.—Weaverthorpe.
When the flakes have been chipped into the scraper form at both ends they may be termed double-ended scrapers—to which class circular scrapers also belong; where a sort of handle has been worked they may be termed spoon-shaped, and where the butt has been chipped to a sharp chisel-edge, at right angles to the flat face, they have been called tanged scrapers.
In speaking of the sides as right or left, I do it with reference to the flat face of the scraper, as shown in the first of the three views of Fig. 204.
It will be well to pass some of the forms in review before entering into any more general considerations.
The figures are all of full size, Fig. 204, from Weaverthorpe, on the Yorkshire Wolds, is a good example of a symmetrical horseshoe-shaped scraper. It is made from a broad flat flake, of rather pink
