Page:The Ancient Stone Implements (1897).djvu/402

This page has been proofread, but needs to be validated.
380
JAVELIN AND ARROW HEADS.
[CHAP. XVI.


Fig. 303.—Yorkshire Wolds.

A magnificent specimen of much the same type as Fig. 303, but nearly twice as long, has been kindly lent me for engraving by Messrs. Mortimer, of Driffield, Yorkshire. It was found in the neighbourhood of Fimber, and is shown in Fig. 304. It is neatly chipped over both faces, which are equally convex, and the stem is carefully shaped and of considerable thickness. The edges, as is not unfrequently the case, are serrated.

The fine arrow-head engraved as Fig. 305 shows the barbs or "witters" still more strongly developed. One of them is, however, less pointed than the other. From its size, this and others may have formed the heads of javelins rather than of arrows, though arrow-heads as large are still in use among some savage tribes. It was found at Pick Rudge Farm,[1] Overton, Wilts, in company with the oblong implement engraved as Fig. 255. It is now in the Blackmore Museum, the Trustees of which kindly allowed me to figure it.

I have a very fine specimen with even longer barbs, from Ashwell, Herts, which is shown in Fig. 305a.

Fig. 304.—Yorkshire Wolds. Fig. 305.—Pick Rudge Farm.
Fig. 306 represents another unusually large specimen, found on Sherburn Wold, Yorkshire. It is nicely worked on both faces, and the end of the stem or tang has been carefully chipped to a sharp semicircular edge, well adapted for fixing into the split shaft. One similar to it was found on Bull Hill,[2] Lancashire. Mr. A. C. Savin, of Cromer,
  1. Arch. Journ., vol. xii. p. 285. "Cat. Mus. Arch. Inst. at Ed.," p. 40.
  2. Trans. Lanc. and Chesh. Arch. Soc., vol. iv. p. 306.