This page has been validated.
Install hdw. ci. section of floor, then install board section of floor, and door sill by same directions as given In Chap. 22 for Fancier’s 2-Pen Unit. Illus. 31 gives side view showing complete floor, back and top construction. The cross-tie (C.T.) may now be installed as per Illus. 20, 30, 31, 40. Each end and partition is sawed
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e5/The_Golden_Hamster_Manual_0036-1.jpg/250px-The_Golden_Hamster_Manual_0036-1.jpg)
into, barely enough to permit C.T. to fit Into its top edge, back from front no more than required for closing of doors. With ends and partitions equally spaced, nail cross-tie securely to them, as per Ilius. 30, where
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/ef/The_Golden_Hamster_Manual_0036-2.jpg/250px-The_Golden_Hamster_Manual_0036-2.jpg)
—35—