��SIRLOIN OF BEEF.
���SIRLOIN OF BEEF.
THIS choice roasting-piece should be cut with one good firm stroke from end to end of the joint, at the upper part, in thin, long, even slices in the direction of the line from 1 to 2, cutting across the grain, serv- ing each guest with some of the fat with the lean ; this may be done by cutting a small, thin slice from underneath the bone from 5 to 6, through the tenderloin.
Another way of carving this piece, and which will be of great as- sistance in doing it well, is to insert the knife just above the bone at the bottom, and run sharply along, dividing the meat from the bone at the bottom and end, thus leaving it perfectly flat ; then carve in long, thin slices the usual way. When the bone has been removed and the sirloin rolled before it is cooked, it is laid upon the platter on one end, and an even, thin slice is carved across the grain of the upper sur- face.
Roast ribs should be carved in thin, even slices from the thick end towards the thin in the same manner as the sirloin ; this can be more easily and cleanly done if the carving knife is first run along between the meat and the end and rib-bones, thus leaving it free from bone to be cut into slices.
Tongue. To carve this it should be cut crosswise, the middle being the best ; cut in very thin slices, thereby improving its delicacy, mak- ing it more tempting; as is the case of all well-carved meats. The root of the tongue is usually left on the platter.