Proclamations Proc. 7529 ANNEX (continued) 11 (D) hot-rolled, flat-rolled, dual-phase steel product, phase-hardened, primarily w\177th a femt\177c-martensit\177c mmrostructure, containing, by weight, from 0.9 percent to 1.5 percent sihcon; further characterized, for thicknesses greater than or equal to 2 mm, e\177ther by a tensile strength of from 540 N/ram 2 to 640 N/mm 2 with an elongation percentage of greater than or equal to 26 percent, or by a tensile strength of from 590 N/ram-' to 690 N/mm-' with an elongation percentage of greater than or equal to 23 percent, the foregoing also designated as X-011; (xvm) hot-rolled dual phase low sihcon steel, the foregoing which is a phase-hardened ferrinc-martens\177t\177c steel containing, by weight, sdicon of up to 0.25 percent, phosphorus of up to 0.05 percent and sulfur of 0.03 perdent, and has a tensde strength of between 580 and 670 MPa, y\177eld strength of between 300 and 470 MPa, and elongation of greater than, or equal to, 24 percent, the foregoing designated as X-075; (x\177x) hot-rolled products designated as X-108, as described below: (A) products known as "Domex Defend 250," not further processed than hot rolled, in thicknesses of between 3.00 and 6.00 mm, inclusive, and widths of between 889 mm and 1245 mm, inclusive, containing, by weight, carbon of 0.12 percent typical value (TV), s\177licon of 0.40 percent TV, manganese of 2.0 percent TV, phosphorus of 0.025 percent TV, sulphur of 0.010 percent TV, aluminum of 0.015 percent TV, w\177th m\177cro-alloymg elements of mobram, vanadium, t\177tamum and molybdenum; exhibiting a hardness ranng of 250 Hv (provided for in subheading 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7225.30.30 or 7225.30.70); (B) products known as "Domex Defend 300," not further processed than hot rolled, in thicknesses of between 3.00 and 6.00 mm, inclusive, and widths of between 889 mm and 1245 mm, inclusive; containing, by weight, carbon of 0.17 percent TV, sihcon of 0.30 percent TV, manganese of 1.8 percent TV, phosphorus of 0.025 percent TV, sulphur of 0.010 percent TV, aluminum of 0.015 percent TV, with m\177cro-alloying elements of chromium, molybdenum, and titanium; exhibiting a hardness rating of 300 Hv (provided for in subheadings 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7225.30.30 or 7225.30.70); or (C) products known as "Domex Defend 500? not further processed than hot-rolled, in thicknesses of between 2.00 and 6.00 mm, inclusive, and widths of between 889 mm and 1245 mm, inclusive; containing, by weight, carbon of 0.29 percent TV, silicon of 0.30 percent TV, manganese of 1.3 percent TV, phosphorus of 0.035 percent TV, sulphur of 0.025 pement TV, with micro-alloying elements of chromium, niobium, molybdenum, and boron; exhibiting a hardness rating of 500 Hv (provided for in subheading 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7225.30.30 or 7225_30.70); Ixx) flat-rolled products of other ahoy steel, not further processed than hot rolled, of the grade known as ' ALFORM" or "ALFORM 890/900," of a thickness of less than 475 mm, whether in coils or in cut-to-length form (provided for in subheading 7225.30.70 or 7225.40.70), the foregmng designated as X-116; (xxl) hot-rolled products designated as X-122, as described below: (A) hot-rolled complex phase steel with mainly fine grained ferritic-bainitic-martensitic microstructure characterized by either a tensile strength over 800 MPa and elongation percentage over 10% for thicknesses up to 5.0 ram; a tensile strength over 880 MPa and an elongation percentage over 10% for thicknesses up to 4.0 ram; or a tensile strength over 950 MPa and an elongation percentage over 10% for thicknesses up to 4.0 mm; (B) hot-rolled martensitic phase steel with mainly martensitic mtcrostructure characterized by either (1) a tensile strength over 1000 MPa and elongation percentage over 5 percent for thicknesses up to 3.5 mm, or (1I) a tensile strength over 1200 MPa and an elongation percentage over 5 percent for thicknesses up to 4.0 mm; or 31
�
