This page has been validated.
STOP AND GIVE WAY MARKINGS
3.21 On roads where a 1 m hard strip is provided, demarcated with the edge of carriageway marking to diagram 1012.1 or 1012.3, the Give Way marking should be aligned with the back of the hard strip and not with the edge line (see figure 3-3).
3.22 Diagram 1003 should not be used on highspeed dual carriageway roads where traffic either joins from a slip road (at a grade separated junction) or there is a merging taper. At such sites the marking to diagram 1010 should be used (see figure 3-4).
11
