Page:UK Traffic Signs Manual - Chapter 8 - Part 2- Traffic Safety Measures and Signs for Road Works and Temporary Situations) - Operations 2009.pdf/175

This page has been proofread, but needs to be validated.
A1 APPENDIX TABLES

Table A1.3 Recommended spacing and sizes of traffic cones
Road Type Single carriageway road (permanent speed limit of 30mph or less) Single carriageway road (permanent speed limit of 40 mph) Single carriageway road (permanent speed limit of 50mph or more) Dual carriageway road (permanent speed limit of 40 mph or less) Dual carriageway road (permanent speed limit of 50 mph or 60 mph) Dual carriageway road
(national speed limit)
  Relaxation   Relaxation   Relaxation
Rate of taper (see Note 3) 1 in 13 1 in 20 1 in 25 1 in 25 1 in 40 1 in 55 1 in 40
Taper length (m) for hazard of standard carriageway width between 3.6 m and 4m 50 80 100 100 100 150 150 200 150
Minimum number of cones 18 28 68 35 35 101 51 135 51
Taper See Note 8 for spacing of cones in 45° tapers Minimum cone size (mm) 450 450 750 750 450 750 750 1000
(see Note 5)
1000
(see Note 5)
Maximum cone spacing (m) 3 3 1.5 3 3 1.5 3 1.5 3
Maximum warning light spacing (m) 9 9 9 9 9 9 9 9 9
Longitudinal Minimum cone size (mm) 450 450 750 750 450 750 750 750
(see Note 5)
750
(see Note 5)
Maximum cone spacing (m) 9 9
(see Note 1)
9 9
(see Note 1)
9
(see Note 1)
9 9
(see Note 1)
9 18
Maximum warning light spacing (m) 9
(see Note 2)
9
(see Note 2)
18 18 18 18 18 18 18

173