which terminated in feet. They were fastened to the corners in such a way that they seemed to come out of them; and they rose above the corners with a slight inclination (curve) towards the middle of the neck or capital, till they came under the outer rim of the basin which rested upon the capital of the lid of the chest, so as to support the basin, which turned considerably outwards at the top.
Verses 35-36
1Ki 7:35-36 “And on the upper part of the stand (the mechonah chest) half a cubit high was rounded all round, and on the upper part were its holders, and its panels out of it. המּכונה ראשׁ is the upper portion of the square chest. This was not flat, but rounded, i.e., arched, so that the arching rose half a cubit high above the height of the sides. This arched covering (or lid) had ידות, holders, and panels, which were therefore upon the upper part of the מכונה. The holders we take to be strong broad borders of brass, which gave the lid the necessary firmness; and the fillings or panels are the thinner plates of brass between them. They were both ממּנּה, “out of it,” out of the upper part of the mechonah, i.e., cast along with it. With regard to the decoration of it, 1Ki 7:36 states that “he cut out (engraved) upon the plates of its holders, and upon its panels, cherubim, lions, and palms, according to the empty space of every one, and wreaths all round.” We cannot determine anything further with regard to the distribution of these figures.
Verses 37-38
1Ki 7:37-38 “Thus he made the ten stools of one kind of casting, measure, and form, and also ten brazen basins (כּיּרות), each holding forty baths, and each basin four cubits.” In a round vessel this can only be understood of the diameter, not of the height or depth, as the basins were set upon (על) the stands. על־המּכונה אחד כּיּור is dependent upon ויּעשׂ: he made ten basins, ... one basin upon a stand for the ten stands, i.e., one basin for each stand. If then the basins were a cubit in diameter at the top, and therefore their size corresponded almost exactly to the length and breadth of the stand, whilst the crown-like neck, into which they were inserted, was only a cubit and a half in diameter (1Ki 7:31), their shape must have resembled that of widespreading shells. And the form thus given to them required the shoulder-pieces described in 1Ki 7:30 and 1Ki 7:34 as supports beneath the outer rim of the basins, to prevent their upsetting when the carriage was wheeled about.[1]
- ↑ The description which Ewald has given of these stands in his Geschichte, iii. pp. 311,312, and still more elaborately in an article in the Göttingen Gelehrten Nachr. 1859, pp. 131-146, is not only obscure, but almost entirely erroneous, since he proposes in the most arbitrary way to make several alterations in the biblical text, on the assumption that the Solomonian stands were constructed just like the small bronze four-wheeled kettle-carriages (hardly a foot in size) which have been discovered in Mecklenburg, Steyermark, and other places of Europe. See on this subject G. C. F. Lisch, “über die ehernen Wagenbecken der Bronzezeit,” in the Jahrbb. des Vereinsf. Mecklenb. Geschichte, ix. pp. 373,374, where a sketch of a small carriage of this kind is given.
