3.4.2.2 Biological Safety Cabinets
The Centers for Disease Control and Prevention (CDC) divides biological safety cabinets (BSCs) into three classes: Class I, Class II, and Class III. The Class II BSCs are further divided into four subcategories (A1, A2, B1, B2) [DHHS 2009]. These hoods are used for processes that require operator and product protection. The BSC pulls air into the hood to protect the operator while providing a downward flow of HEPA-filtered air inside the cabinet to minimize cross-contamination along the work surface (see Figure 11). The most common BSC (Type II/A2) uses a fan to provide a curtain of HEPA-filtered air over the work surface. The downward moving air curtain splits as it approaches the work surface; some of the air is drawn to the front exhaust grille and the remainder to the rear grille. The air is then drawn back up to the top of the cabinet where it is recirculated or exhausted from the cabinet. In general, 70% of the air is HEPA-filtered and recirculated while 30% is filtered and then exhausted from the cabinet. The make-up air is drawn through the front of the cabinet. The air being drawn in acts as a barrier to protect the workers from contaminated air leaking out of the hood.
.png)
Figure 11. A tabletop model of a Class II, Type A2 biological safety cabinet (BSC) (Used with permission from ASHRAE [2011].)
Current Strategies for Engineering Controls in Nanomaterial Production and Downstream Handling Processes
33
