Page:Popular Science Monthly Volume 11.djvu/565

This page has been validated.
ON DROPS.
547

case corresponds to that of a simple pendulum started with a blow so violent as to break the string.

But the liquid star and the complicated pattern on the smoked glass show that the splash is not a simple spreading out of the drop equally in all directions, to return again.

Fig. 7. Fig. 8.

In order to observe the form of the drop at any given instant during the splash, it is necessary to make use of the electric spark, and to take advantage of the fact that drops of the same size falling from the same height will all behave in the same way.

It will be necessary to let a drop, say of mercury, fall on a plate in comparative darkness, and to produce a strong spark at the instant the bottom of the drop comes in contact with the plate, and so illumine it; the observer will then see the drop in the form it has at that instant.

A second drop must be let fall in the same way, and be illumined by the spark not at the first moment of contact, but a shade later, say 1100 second later, when the drop will have spread itself out slightly on the plate; and similarly we must illuminate a third drop a shade later than the second, and so on. The observer can, after a little practice, draw from memory on each occasion the drop in the form in which he has seen it. It will be seen that the process consists in isolating consecutive phases of the splash from those that precede and follow, and which take place in darkness, and so do not confuse what has been seen as they would do in continuous daylight.

The device adopted by the writer for so timing the appearance of the spark as to illumine the drop at any desired phase of the splash consisted essentially in breaking the current of an electro-magnet at the instant the drop began to fall, the magnet, thus ceasing to act, releases a spring which immediately begins to pull the terminal wire of a strong electric current out of the other terminal, which is a cup of mercury, and the strength of the spring and the depth of immersion of the wire in the mercury are so adjusted that the wire leaves the surface of the mercury, and the required spark is produced at the instant the drop reaches the plate.